1. Prof. Leon Gradon (Warsaw Inst. of Technology), Fullbright Professor, 7/93 – 8/94.
2. Dr. Gerald Surrender, Visiting Scientist, National Lab. Trivandarum, India, 3/1997 – 9/1997.
3. Prof. Ki Chang Song (Konyang Univ. Korea), SNF Visiting Professor, 3/1999-2/2000.
4. Prof. Lakis Mountziaris (Dept. of Chemical Engineering, SUNY at Buffalo), 2-5/2000.
5. Prof. Phil Morrison (Case Western Reserve University), 1-4/2002.
6. Prof. Greg Beaucage (University of Cincinnati), 8/2003 – 7/2004.
7. Prof. Sukon Phanichphant (Chiang-Mai Univ. Thailand), 4-6/2005.
8. Prof. Sean Garrick (Univ. of Minnesota), 1 – 6/2006.
9. Prof. Kenji Iimura (Hyogo University, Japan), 4/2007 -3/2008
10. Prof. Yiannis Delliyiannakis (Univ. of Ioannina, Greece) 2012- 2013
11. Prof. Vlasis Mavrantzas (Univ. of Patras, Greece) 2014 – present
12. Prof. Kyriaki Polychronopoulou (Kalipha U., UAE) 5-8/2017
13. Prof. Asterios Gavriilidis (Univ. College London) 2-4/2018
14. Prof. Jakub Gac (Warsaw Tech. Univ) 3-4/2018

1. F. Einar Kruis, visiting Ph.D. student (6/92-8/92), PhD 1993, Delft Inst. of Technology, Netherlands, currently, Professor, Universitat Duisburg, Germany.
2. Paul Vercoulen, visiting Ph.D. student (6/93-8/93), PhD 1995, Delft Inst. of Technology, Netherlands, currently Research Engineer, DSM, Geleen, The Netherlands.
3. Fred Hoornaert, visiting MS student (1/94-3/94), MS 1995, Delft Inst. of Technology, Netherlands, currently, Process Engineer, Fluor Daniels, Rotterdam, The Netherlands.
4. Christian Jansen, visiting student (9/94-3/95), Diploma 1996, University of Duisburg, Germany, currently Ph.D. student at the University of Duisburg.
5. Brigitte van den Eijnden, visiting MS student (5/95-8/95), Diploma 1996, Delft Inst. of Technology, Netherlands, currently with Procter and Gamble, Belgium.
6. Quan Nguyen, visiting MS student (4/95-9/96) from University of Freiberg, Germany.
7. Steffen Sanders, visiting MS student (4/95-9/96) from University of Freiberg, Germany.
8. Tue Johanessen, visiting Ph.D. student (6/97-11/97), TU Denmark, Lingby, Denmark.
9. Andre Fuhrman, visiting MS student (6/97-6/98) from University of Freiberg, Germany.
10. Wey Yang Teoh, visiting PhD student, 2004, Univ. New South Wales, Australia, currently Associate Professor, City Univ. of Hong Kong, China.
11. Boontida Pongtawornsakun, visiting PhD student, 7-11/2014, Chulalongkorn Univ., Thailand
12. Keroles Riad, visiting MSc (2015) and PhD student, 9/2016-3/2017, Concordia U., Canada

1. Gautam M. Phanse, M.S. Thesis, 1987
2. Ming-Jiann Tsai, M.S. Thesis, 1988, currently Process Development Engineer with Clarion Electronics, Rockford, IL.
3. James D. Landgrebe, M.S. Thesis, 1989, currently Design Engineer with Procter & Gamble, Cincinnati, OH.
4. Tom Hashman, M.S. Thesis, 1991, Process Environmental Engineer, South Coast Air Quality Management District, Los Angeles, CA
5. Guizhi Wang, M.S. Thesis, 1993.
6. Patrick Spicer, M.S. Thesis, 1994 and Ph.D. 1996 currently with P&G in Cincinnati, OH.
7. Wolfgang Keller, Diplomarbeit 1995 at UC from Universitat Karlsruhe, Germany.
8. Siddhartha Panda, M.S. Thesis, 1995, cuurently Professor at IIT Kanpur, India.
9. Wenhua Zhu, M.S. Thesis, 1996.
10. Christian Artelt, Diplomarbeit 1996, at UC from University of Karlsruhe, Germany and Ph.D. 2006, U. Munich, Germany currently with Lafrage, France.
11. Heiko Briesen Diplomarbeit 1997 at U. Cincinnati from Technical Univ. Karlsruhe, Germany currently with Ph.D. from TU Aachen and Professor at Technical Univ. Munich, Germany.
12. Juergen Flesch (6/97-12/97) Diplomarbeit 1997 at U. Cincinnati from the Univ. of Karlsruhe
    -1997 First Student Poster Award for Particle Technology, AIChE Mtg Los Angeles, CA
    currently with Evonik AG, Hanau, Germany.
13. Stavros Tsantilis, M.S. Thesis, 1998 at the University of Cincinnati, currently with Rieter AG.
14. Hendrik Kammler, Diplomarbeit 1998 at UC, Universitat Karlsruhe, Germany.
15. Marcel Estermann, Diplomarbeit 1999, ETHZ, currently with Esoro AG.
16. Omri Senn, Diplomarbeit 1999, ETHZ, currently with Sulzer AG.
17. Sarah Cunningham, M.S. Thesis, 1999, UC, currently with Corning Glass Inc., Optical Fiber Process Engineer, Wilmington, NC.
18. Osama Arabi-Katbi, M.S. Thesis, 1999, UC, currently with Degussa USA, Mobile, AL
19. Bernie Walker, Diplomarbeit 2000, ETHZ, currently at Lonza, AG, Visp, Switzerland.
20. Beat Borer, Diplomarbeit 2000, ETHZ, currently Ph.D. student at ETHZ
21. Roger Mueller, Diplomarbeit 2000, ETHZ, currently Ph.D. student at ETHZ
22. Olivier Chaoul, M.S. Thesis, 2000, currently with Pocketscript Co., Mason, OH
23. Sandra Foncilas, Diplomarbeit 2000 at ETHZ from University of Valencia, Spain
24. Nicole Bieri, Diplomarbeit 2000, ETHZ, currently w/ Novartis, Basle, CH
25. Wendelin Stark, Diplomarbeit 2000, currently Professor ETH Zurich.
26. Thomas Meirhans, Diplomarbeit 2001, ETHZ, currently with Nestle AG
27. Reto Strobel, Diplomarbeit 2002, currently w/ von Roll –Honda, Zurich, CH
28. Frank Ernst, Diplomarbeit 2002 at ETHZ f currently w/ Holcim Baden, CH
29. Heiko Schulz, Diplomarbeit 2003 at ETHZ currently w/ BASF Ludwigshafen, Germany
30. Alexandra Teleki, Diplomarbeit 2003 at ETHZ currently w/ Uppsala U. Sweeden
31. Tobias Weber, Diplomarbeit 2003, at ETHZ currently with Gericke AG.
32. Adrian Camenzind Diplomarbeit 2005, ETHZ, currently with Optotune AG, Zurich, CH.
33. Tim Patey, Diplomarbeit 2005, ETHZ, currently w/ ABB Baden, Switzerland
34. Bjorn Schimmoeller, Diplomarbeit 2006 at ETHZ, currently w/ Cabot, Billerica, MA
35. Robert Büchel Diplomarbeit 2006, ETHZ, currently w/ Optrel SA, Wattwil, CH
36. Thomas Rudin Diplomarbeit 2006, ETHZ, currently w/ Bühler, Uzwil, CH
37. Beat Busser MS Process Eng., 2007, ETHZ, currently Research Asoc. IBM Dublin, Ireland
38. Nada Bjelbrk, MS Mechanical Eng., 2008, ETHZ, currently post-Ph.D. student at MIT
39. Max Eggersdorfer MS Mechanical Eng., 2008, ETHZ, currently w/ Novartis, Basle
40. George Sotiriou MS Micro-Nano, 2008, ETHZ, currently Asst. Prof. Karolisnka Inst. Sweeden
41. Oliver Waser, MS Mechanical Eng., 2009, ETHZ, currently w/ E-FORCE
42. Marco Righettoni, MS Mechanical Eng., 2009, ETHZ, currently at Nestle
43. Zabdiel Trinidad (U. Vera Cruz, Mexico), 2010, MS Process Eng.
44. Ihab Mustafa, (Amer. Univ. Cairo, Egypt), MS Process Eng., currently @ Sefag AG
45. Christofer Kellerberger, ETHZ, MS Micro-Nano Eng. currently Ph.D. student at ETHZ
46. Samuel Gass (ETH Zurich), MS Mechanical Eng., currently at UN Geneva
47. Leonardo Meiler (ETH Zurich), MS Process Eng.
48. Sebastian Conrady (ETH Zurich), MS Process Eng., (thesis at UC Berkeley)
49. Christoph Blattmann (ETHZ) MS Process Eng., currently PhD student at ETHZ
50. Kevin Wetter (ETHZ) MS Process Eng.
51. Laetitia von Rochow (EPF Lausane) MS Process Eng.,
52. Fabian Starsich (ETHZ) MS Process Eng., currently PhD student at ETHZ
53. Donovan Chie (ETH Zurich), MS Process Eng.
54. Gion Etterlin, (ETHZ) MS Mechanical Eng.
55. George Kelesidis (Univ. Patras) MS Process Eng., currently PhD student at ETHZ
56. Samuel Rigli (ETH Zurich), MS Process Eng., currently PhD student, Norway
57. Marianna Diamantopoulou (Univ. Patras), MS Process Eng., currently PhD student at ETHZ
58. Nicolay Pinaeu (ETH Zurich), MS Process Eng. currently PhD D-MAVT
59. Vasil Vasilev (ETH Zurich), MS Process Eng. currently in Lonza AG
60. Davide Stucchi (Polytechnico Milano) MS Process Eng. currently in industry
61. Sebastian Abegg (ETH Zurich) MS Mechanical Eng.,
    -Best Poster Award for Instrumentation for Chemical Aerosol Characterization, 2017 European Aerosol Conference, Zurich, Switzerland
62. Jonathan Theodore (ETH Zurich) MS Process Eng.
63. Stephanie Schön (ETH Zurich), MS Process Eng., currently in Sensirion AG
64. Vaios Moschos (Aristotle Univ. Thessaloniki), MS Process Eng., currently PhD at ETHZ
65. Dorian Henning (ETH Zurich), MS Process Eng. currently PhD at Imperial College, UK
66. Julia Kompalla (ETH Zurich), MS Process Eng.,
67. Noah Abdelahab (Cairo Univ), MS Mechanical Eng.
68. Natalia Smatsi (ETH Zurich), MS Micro-Nano,
69. Amy Wang (City Univ. Hong-Kong) MS Process Eng.
70. Ines Weber (ETH Zurich), MS Materials Science
71. Sebastian Keller (ETH Zurich) MS Mechanical Eng.
72. Simon Benz (ETH Zurich) MS Mechanical Eng.
73. Dario Bischoff (ETH Zurich) MS Mechanical Eng.
74. Amogh Nagarkar (ICT Bombay) MS Process Eng.
75. Patricia Crepaldi (Polytechnico Milano) MS Process Eng.
76. Christian Kubsch (ETH Zurich) MS Process Eng.
77. Rawan Mohammad (Univ. Jordan) MS Process Eng.
78. Matteo D‘ Andria (ETH Zurich) MS Process Eng. currently PhD at ETHZ
79. Michael Pereira (ETH Zurich) MS Mechanical Eng. currently PhD at ETHZ
80. Alex Weber (ETH Zurich) MS Mechanical Eng.

1. Dr. Hebi Bai, 1989-90, Instructor, Department of Chemistry, University of Cincinnati.
2. Dr. Karl Kusters (Ph.D. 1991, Eindhoven Inst. Technol., Netherlands), 1/1992-10/1993, currently with Shell Oil Co. in Amsterdam, Netherlands
3. Mr. Andreas Schild (Dipl. 1996, U. Karlsruhe) 1996-97 currently with Clariant AG, Basle.
4. Dr. Heike Muhlenweg (U. Clausthal, 1996) 1998-99 currently w/ Evonik.
5. Dr. Georg Skillas (ETHZ 1998 ETHZ) Oberassistant, 1999 –2001, currently with Evonik.
6. Prof. Jinsoo Kim, (U. Cincinnati, 1999) Research Associate, 1999-2002 currently Professor, Chemical Engineering Dept., Kung-Hee Univ., Korea
7. Prof. Lutz Maedler (U. Freiburg, 1999) Oberassistant, 1999-2005, currently Professor, Production. Eng. Dept., U. Bremen, Germany.
8. Dr. Georg Barthelmes (U. Karlsruhe, 2000) 2000-03 now w/ Helbling Technik AG, Aarau
9. Dr. Karsten Wegner, (ETH Zürich 2002) 2002-2004 & Senior Res. Assoc. 2005-present
10. Dr. Hendrik Kammler, (ETH Zürich 2002) 2002-4, currently with Novartis AG, Basle.
11. Dr. Stavros Tsantilis, (ETH Zürich, 2002) 2002-04 Senior PE Engineer at Vistaprint Schweiz GmbH, Winterthour, Switzerland
12. Prof. Wendelin Stark (ETH Zürich, 2002) 2002-03, currently Assoc. Professor, Chemistry Dept., ETH Zürich
13. Dr. Dong-Jo Kim (Ph.D. Kangwon National Univ. Korea) Resarch Assoc. 2003-2004
14. Dr. Albert Rossler (ETHZ 2003), 7-9/2003, currently with Adler AG, Austria
15. Dr. Murray Height, (MIT, 2003), 2004-5, currently with HeiQ AG, Switzerland.
16. Dr. Reto Strobel (ETH Zurich 2006), 2006 – 08, currently with Satisloh AG, Zurich.
17. Dr. Tobias Elmoe (TU Denmark), 2008-9, currently at TU Denmark, Copenhagen
18. Dr. Alexandra Teleki (ETHZ), 2008- 2009, currently at DSM Co., Basle, Switzerland
19. Dr. Helmi Keskinen (Tampere U., Finland) 2007- 2009, currently at U. Kuopio, Finland
20. Dr. Antonio Tricoli (ETHZ), 2009-2012, currently Australian Natl. Univ., Canberra, Australia.
21. Dr. Bjorn Schimmoeller (ETHZ), 2010-11, currently at Cabot Co., Billerica, MA.
22. Dr. Gianluca Santarosa (Univ. Roma, Italy), 2010-11, currently at Novartis, Basle
23. Dr. Beat Busser (ETHZ), 2011-2012, currently at MIT (with Prof. W. Green, ChE)
24. Dr. Robert Büchel (ETHZ), 2011-2017, currently Research Engineer, Optrel SA, Wattwil, CH
25. Dr. Florentine Hilty-Vancura (ETHZ), 2011-2012, currently at Omya AG, Offringen CH
26. Dr. George Sotiriou (ETHZ), 2011-13, currently at Karolinska Inst. Stockholm, Sweden
27. Dr. Max Eggersdorfer (ETHZ), 2012-13, currently at Novartis, Basle, CH
28. Dr. Nikos Lempesis (NTU Athens), 2017- 2018 currently at Ass. Prof. Univ. Ioannina, Greece
29. Dr. Ji-Wook Yoon (Korea U.) 2017 – 2018, currently Professor, Chonbuk National Univ., Korea
30. Dr. Andreas Güntner (ETH Zurich) 2017- 2021, currently Ass. Prof. ETH Zurich
31. Dr. M. Reza Kholghy (U. Toronto) 2017 – 2020, currently Ass. Prof. Caleton U. Ottawa, Canada
32. Dr. George Kelesidis (ETH Zurich) 2019-2024, currently Ass. Prof. TU Delft, Netherlands
33. Dr. Pascal Gschwend (ETH Zurich) 2020-2021, currently Research Engineer, Roche Diagnostics Intl AG, Zug, CH
34. Dr. Katerina Karadima (U. Patras) 2022-2024, currently Research Engineer, U. Patras, Greece
35. Dr. Dimitris Tsalikis (NTU Athens), 2023- now, currently Research Associate, PTL, ETH Zurich

Lutz Maedler, “Flame Spray Pyrolysis for Synthesis of Functional Nanoparticles”, Habilitation in Dept. of Mechanical and Process Engineering, ETH Zürich (2003)

• 2004 inaugural BASF Award in Process Engineering
• 2005 Marian Smoluchowski Award, European Aerosol Association
• 2009 Dechema Max Bouchner Prize

currently Professor, Department of Production Engineering, Univ. of Bremen, Germany

1. Prof. Kyo-Seon Kim, “Fabrication of Optical Fiber Preforms by Modified Chemical Vapor  Deposition”, Ph.D. Thesis, 1989, Univ. Cincinnati, currently Professor, Department of Chemical Engineering, Kangwon National University, Korea.

2. Yun Xiong, “Dynamics of Particle Formation and Growth in Gas Phase Processes”, Ph.D.        Thesis, 1992, Univ. Cincinnati, currently Senior Scientist, Research and Development, Millennium Chemicals Inc. (A Cristal Company), Baltimore, MD.

3. M. Kamal Akhtar, The Effect of Cooxidants during Titania Formation by TiCl₄ Oxidation, Ph.D., 1993, Univ. Cincinnati, currently Director, Strategic Manufacturing Research, Millennium Chemicals Inc. (A Cristal Company), Baltimore, MD.

4. George P. Fotou, “NanoParticle Engineering: Fiber Coating and Photocatalysis”, Ph.D.             Thesis, 1995, Univ. Cincinnati, currently Process Research Engineer, Cabot Microelectronics Co., Chicago, IL.

5. Srinivas Vemury, “Flame Synthesis of Particles: Effect of Charging”, Ph.D. Thesis 1996, Univ. Cincinnati

–1998 Sheldon K. Friedlander Award for best Ph.D. Thesis in Aerosol Science and Engineering, American Association for Aerosol Research (AAAR);

currently with Corning Glass Inc., Wilmington, NC.

6. Patrick Spicer, “Shear Induced Aggregation-Fragmentation: Mixing and Aggregate Morphology Effects” Ph.D. 1997 Univ. Cincinnati

-1998 First Prize for a Paper by a Graduate Student, Environmental Division, AIChE

– 1998 Best Ph.D. in Particle Technology, Particle Technology Forum, AIChE

currently Assoc. Prof., School Chem. Eng., Univ. New South Wales, Sydney, Australia

7. Karsten Wegner, “Nanoparticle Synthesis in Gas-Phase Systems: Process Design and Scale-up for Metals and Metal Oxides” # 14568, ETH Zürich (2002)

-2002 ETH Medal for outstanding Dissertation,

currently CEO Wegner Consulting & Lecturer and Research Associate at ETH Zurich.

8. Hendrik Kammler, “Synthesis of Oxide Nanoparticles with Closely Controlled Characteristics”, # 14622, ETH Zürich (2002) currently Research Engineer, Clariant AG, Basle, Switzerland.

9. Stavros Tsantilis “Primary and Agglomerate Aerosol Dynamics” #14695, ETH Zürich (2002)

-2004 Best Poster Prize in PARTEC2004, Nuremberg, Germany,

currently Research Engineer at Vistaprint Schweiz GmbH, Winterthour, Switzerland.

10. Prof. Wendelin Stark, “Functional Nanoparticles by Flame Aerosol Synthesis:Applications in Heterogeneous Catalysis”,  # 14924, ETH Zürich (2002)  

-1^st Poster Prize in Particle Technology, 2002 AIChE Mtg., Indianapolis, IN  –2004        -2003 Hilti Prize for the outstanding PhD Dissertation in ETH Zurich by a candidate under 30 years old,

currently Associate Professor, Dept. of Chemistry, ETH Zurich.

11. Roger Mueller, “Characterization and Synthesis of Nanoparticles made in Vapor and Spray Flames”, Dissertation # 15147, ETH Zürich (2003) currently Project Manager Sustainability at Novartis, Basel, Switzerland

12. Takao Tani, “Flame spray pyrolysis of ZnO/silica nanoparticles” # 15266, ETH Zurich (2003), currently Leader, Materials Design Group, Nanospace-utilized Materials Program, Frontier Research Center, Toyota CR&DL, Nagoya, Japan.

13. Oliver Wilhelm, “Electrohydrodynamic spraying – Transport, mass and heat transfer of charged droplets and their application to the deposition of thin functional films”,  # 15406, ETH Zürich (2004) currently with EnBW Kraftwerke AG, Philippsburg, Germany.

14. Susanne Veith, “Retention, Diffusion and Release of Flavor Molecules from Porous Sol-Gel-made Particles”, # 15490, ETH Zürich (2004)

-2004 ETH Medal for outstanding Dissertation,

currently Research Engineer, DuPont, Wilmington, DE, USA.

15. Marc Kaelin, “Low-cost Cu(In,Ga)Se₂ absorbers from nanosized precursor materials for thin film solar cells“, Dissertation # 15877, ETH Zürich (2005), currently w/ Flisom AG, Zurich, Switzerland.

16. Rainer Jossen, “Controlled Synthesis of Mixed Oxide Nanoparticles by Flame Spray Pyrolysis“,  # 16401, ETH Zürich (2005), currently with Lonza AG, Visp, CH.

17. Reto Strobel, “Aerosol flame synthesis of supported metal particles and their catalytic applications“, # 16592, ETH Zürich (2006),

                        –2006 ETH Medal for outstanding Dissertation

–2008 Sheldon K. Friedlander Award for best Ph.D. Thesis in Aerosol Science and Engineering, American Association for Aerosol Research;

currently with Satisloh Photonics AG, Horgen, Switzerland

18. Heiko Schulz, “Nanocomposites from Flame-made Nanoparticles: Radiopaque Ta₂O₅ /SiO₂ for Dental Adhesives and Fillings”, Dissertation # 17188, ETH Zürich (2007),                       

                        –2008 Georg Fischer Prize (ETH) for outstanding Dissertation,

            currently with BASF AG, Ludwigshafen, Germany.

19. Martin Heine, “Particle dynamics at high aerosol concentrations and production rates”, #17253, ETH Zürich (2007),

                        –2007 ETH Medal for outstanding Dissertation,

            currently Team Manager at Buhler AG, Uzwil, Switzerland.

20. Frank O. Ernst, “Co-Synthesis of H₂ and Nanocrystalline ZnO Particles by Zn Aerosol Formation and in-situ Hydrolysis”, Dissertation #17272, ETH Zürich (2007), currently at Holcim AG, Switzerland.

21. Alexandra Teleki, “Flame synthesis and coating of nanostructured particles in one step”  #17685, ETH Zürich (2008)

       -second Best Poster Prize in PARTEC2007, Nuremberg, Germany,

       -2008 ETH Medal for outstanding Dissertation,

       –2009 first PhD prize by DSM Co. (South),

currently Assistant Professor, Uppsala Univ. Sweeden

22. Antonio Tricoli, “Gas sensitive nanostructured films by direct flame synthesis and deposition”, #18444, ETH Zürich (2009)

–2010 Hilti Prize for the outstanding PhD Dissertation in ETH Zurich by a candidate under 30 years old,

            currently Associate Professor, Australian Natl. Univ., Canberra, Australia.

23. Adrian Camenzind, “Nanoparticles for Composites: Aggregates and Agglomerates”, #18653, ETH Zürich (2009),

                              -2010 ETH Medal for outstanding Dissertation,

            currently w/ Optotune AG, Dubendorf, CH.

24. Bjorn Schimmoeller “Structure of flame-made mixed metal-oxide based catalysts”, #19060, ETH Zürich (2010).

– Best Poster, Chemical Reaction Engineering, 2010 AIChE Mtg., Salt Lake City, UT 

currently Research Engineer, Cabot Co., Billerica, MA.

25. Robert Büchel, “The Location of Noble Metal Clusters on Multicomponent & Multi-functional Aerosol-Made Heterogeneous Catalysts”  #19617, ETH Zürich (2011).

-Best Paper on Nanoparticles (Group 3d PTF) 2009 AIChE Mtg Nashville TN

-2011 ETH Medal for outstanding Dissertation

– Best Poster, Chemical Reaction Engineering, 2011 AIChE Mtg., Minneapolis

currently Research Engineer, Optrel SA, Wattwil, CH

26. Beat Busser “Multiscale Design for Aerosol Synthesis of Functional Nanoparticles” #19647 ETH Zurich (2011), currently Research Staff member, IBM, Doublin, Ireland. 

27. George Sotiriou “Understanding the Toxicity of Nanosilver for Synthesis of Biocompatible Plasmonic-Superparamagnetic Nanocomposites” #19860, ETH Zürich (2011)

– 1^st  BioNanotechnology Graduate Student Award, 2011 AIChE Mtg. Minneapolis

–2012 Best PhD Thesis Award, Polymers & Colloids Division of Swiss Chem. Soc.

–Best Poster Award, 2012 Annual IFPRI Mtg., Ludwigsburg, Germany

-2012 ETH Medal for outstanding Dissertation

– 2013 Innovation Award, TechConnect 2013, Washington D.C., USA.

-2013 Hilti Prize for the outstanding PhD Dissertation in ETH Zurich by a candidate under 30 years old,

currently Associate Professor, Department of Microbiology, Tumor and Cell Biology, Karolinska Institutet, Stockholm, Sweden

28. Thomas Rudin “Towards Scalable Carbon-Free Synthesis of Sophisticated Nanoparticles” #20581, ETH Zurich (2012), currently Process Engineer at Buhler AG, Uzwil, CH.

29. Maximilian Eggersdorfer “Nanoparticle Agglomerates & Aggregates in Aerosols by Coagulation & Sintering” #20735, ETH Zurich (2012)

-2008 ETH Medal for outstanding MSc studies

-Best Poster Award for aerosol fundamentals, 2011 European Aerosol Conference, Manchester, UK

-First Poster Prize in Particle Technology, 2011 AIChE Mtg., Minneapolis, MN

-Best Poster Award, 2012 Materials Research Society Fall Meeting, Boston, MA

-2013 ETH Medal for outstanding Dissertation

currently Particle Engineer @ Novartis AG, Basle, Switzerland

30. Marco Righettoni “Flame-made WO₃-based nanostructured gas sensors for breath analysis” #21861, ETH Zurich (2014)

–Graduate Student Silver Award, 2010 Mater. Research Soc. Fall Mtg, Boston, MA

-2014 ETH Medal for outstanding Dissertation

currently @ Nestle SA, Konolfligen, Bern, Switzerland

31. Arto Gröhn “Scale-up of Flame Aerosol Synthesis by Computational Fluid Dynamics” #22003, ETH Zurich (2014).

            -Second Poster Prize in Particle Technology, 2012 AIChE Mtg., Pittsburgh, PA

currently Research Associate, Chem. Eng. Dept., Univ. of Colorado

32. Oliver Waser, Flame Aerosol Synthesis of Li-ion Battery Materials, #22730 ETH Zurich (2015)

-Best poster award for aerosol-based nanotechnology, 2009 European Aerosol Conference, Karlsruhe, Germany

currently Research Engineer, Eforce AG, Lucern.

33. Samuel Ansorge, Improvement of Silicone Rubber for High Voltage Applications by Addition of Fillers, # 22763, ETH Zurich (2015).

            Currently President Comité Électronique Suisse, Lucern.

34. Rena Goudeli Multiscale Design of Aerosol Synthesis of Nanomaterials # 23223, ETH Zurich (2016)

– Best Poster Award, 2013 European Aerosol Conference, Prague

– Best Oral Presentation at HH Symposium of 2014 Fall MRS Mtg, Boston.

– 2016 ETH Medal for outstanding Dissertation.

– 2018 InauguralGAeF PhD award by the German Association for Aerosol Research (Gesellschaft für Aerosolforschung)

Currently Lecturer, Chemical Eng. Dept., Univ. of Melbourne, Australia

35. Rajesh Koirala, Flame-made Catalysts for Alkene Production, 23621, ETH Zurich (2016),

– First Place Environ.Div.Grad. Stud.Paper Award, 2012 AIChE Mtg, Pittsburgh, PA

Currently, Research Scientist at CNH Industrial, FPT Motorenforschung in Arbon, CH

36. Kakeru Fujiwara, Metal-Support Interactions in Flame-made Metals on Metal Oxides for Environmental Applications, # 23810, ETH Zurich (2016).  

Currently Asst. Professor, Yamagata Univ. Japan

37. Andreas Günther, Selective gas sensors for breath analysis, #23990, ETH Zurich (2016),

– 2017 ETH Medal for outstanding Dissertation.

– 2017 Best Poster Award for Synthesis and Structuring of Functional Nanoparticles, 2017 European Aerosol Conference, Zurich, Switzerland

– 2019 GAeF PhD award by the German Association for Aerosol Research (Gesellschaft für Aerosolforschung)

– 2019 Product Design Excellence Award for his PhD thesis from the European Federation of Chemical Engineering (EFCE)

Currently Asst. Prof. D-MAVT, ETH Zurich & CEO Alivion AG, Zurich CH

38. Anastasia Spyrogianni, Settling & cytotoxicity of nanoagglomerates, #24395 ETH Zurich (2017)

-Best Poster Award for aerosol-based nanotechnology, 2015 European Aerosol Conf., Milan

-Best Poster Award, Particle Technology Forum, 2017 AIChE Annual Mtg., Minneapolis

Currently Associate Medical Writer at Medicalwriters.com

39. Christoph Blattmann, Application & Synthesis of Polymer Nanocomposites, 25447 ETH Zurich (2018), currently Process Engineer at Buhler AG, Uzwil, CH.

40. Fabian Starsich, Multifunctional nanoparticles for targeted theranostics, #25556 ETH Zurich (2018)

–Environmental Science: Nano Best Poster Award, 2017 European Aerosol Conference, Zurich, Switzerland

Currently, Oberassistant, Nanoparticle Systems Engineering Laboratory, ETH Zürich

41. George Kelesidis Morphology and optical properties of flame-made nanoparticles, # 25934 ETH Zurich (2019)

– IBM Research Prize for Outstanding MSc thesis, Zurich, Switzerland

-Best Poster Award for Combustion, 2016 European Aerosol Conference, Tours, France

                        –First Best Poster Award, 2019 ETH Conference on Combustion Generated Nanoparticles, June 17-20, Zurich, Switzerland.

                        -2019 ETH Medal for Outstanding Doctoral Thesis, ETH Zürich

                        –2019 Best Poster Award, Material Research Society (MRS) Fall Meeting, “Emerging Material Platforms and Approaches for Plasmonics, Metamaterials and Metasurfaces” Symposium, December 1-6, Boston, USA.

                        –2019 First Carbon Nanomaterials Graduate Student Award, 2019 AIChE Annual Meeting, November 10-15, Orlando, USA.

                        –2020 Forbes 30 under 30 Europe List, Science and Healthcare,

-2020 Best Poster Award in Basic Aerosol Process, European Aerosol Conference (virtual), Aachen, Germany

-2020 GAeF PhD award by the German Association for Aerosol Research (Gesellschaft für Aerosolforschung)

            currently Lecturer & Research Associate, Particle Technology Laboratory, ETH Zürich

42. Pascal Gschwend, Aerosol-made Nanoparticles for Theranostics: Bioimaging, Nanothermometry, and Photothermal Therapy, #26809 ETH Zurich (2020).

-2017 Best Poster Award for Synthesis and Structuring of Functional Nanoparticles, European Aerosol Conference, Zurich, Switzerland

                        -2020 ETH Medal for Outstanding Doctoral Thesis, ETH Zürich

Currently Research Engineer, Roche Diagnostics International AG, Zug, CH

43. Jan van der Broek, Highly selective flame-aerosol-made gas sensors enabled by particle-based filters # 27297 ETH Zurich (2021)

-2019 Best Poster Award for Instrumentation, European Aerosol Conf., Goeteberg, Sweden

-2021 Best Poster Award for Chemical Sensors for Wearable devices, Conference on Chemical Sensors for Wearable devices, Mar. 03, Haifa, Israel

-2021 GAeF PhD award by the German Association for Aerosol Research (Gesellschaft für Aerosolforschung)

                        -2021 ETH Medal for Outstanding Doctoral Thesis, ETH Zürich

            Curently Assistant Professor, Dept. of Mechanical & Process Eng’g, ETH Zurich

44. Nicolay Pineau, Flame-made sensor systems #27692 ETH Zurich (2021)

-2017 Best Poster Award for Synthesis and Structuring of Functional Nanoparticles,  European Aerosol Conference, Zurich, Switzerland

Curently CFO Alivion AG, Technopark Zurich, CH

45. Ines Weber, Selective Gas Sensing by Flame-made Catalytic Filters # 28162, ETH Zurich (2022)

-2021 3^rd Best Presentation, 18th International Meeting on Chemical Sensors (virtual), May 30 – June 3, Chicago

-2021 Best Poster Award for Synthesis and Structuring of Functional Nanoparticles, European Aerosol Conference, Birmingham, UK

– 2022 GAeF PhD award by the German Association for Aerosol Research (Gesellschaft für Aerosolforschung)

-2022 ETH Medal for Outstanding Doctoral Thesis, ETH Zürich

Curently Post-doctoral Fellow, Stanford University, CA

46. Una Trivanovic, Synthesis and dynamics of carbonaceous nanoparticles during enclosed spray combustion #30154, ETH Zurich (2024)

– Macroscopic Art Award, American Association for Aerosol Research 41st Annual Conference, Oct. 2 – 6, 2023, Portland, USA

– Best Poster Award, European Aerosol Conference, Sept. 3 – 8, 2023, Málaga, Spain

–1st place of Best Poster Awards of the virtual 25^th ETH-​Conference on Combustion Generated Nanoparticles, June 21 – 23, 2022, Zurich, CH

– Best Poster Prize at the 6th International Sooting Flame Workshop, July 22 – 23, 2022, Vancouver, Canada.

Curently Scientist, Federal Institute of Metrology METAS, Bern, Switzerland

1. S.E. Pratsinis, T. Novakov, E.C. Ellis, S.K. Friedlander, “The Carbon Containing Component of the Los Angeles Aerosol: Source Apportionment and Contributions to the Visibility Budget”, J. Air Pollution Control Assoc., 34, 643-650 (1984).
2. C.J. Schack, S.E. Pratsinis, S.K. Friedlander, “A General Correlation for Deposition of Suspended Particles from Turbulent Gases to Completely Rough Surfaces”, Atmos. Environ., 19, 953-960 (1985).
3. S.E. Pratsinis, T.T. Kodas, M.P. Dudukovic, S.K.Friedlander, “Aerosol Reactor Design: Effect of Reactor Geometry on Powder Production and Vapor Deposition”, Powder Tech., 47, 17-23 (1986).
4. S.E. Pratsinis, T.T. Kodas, M.P. Dudukovic, S.K. Friedlander, “Aerosol Reactor Design: Effect of Reactor Type and Process Parameters on Product Aerosol Characteristics”, Ind. Eng. Chem. Proc. Des. Dev., 25, 634-642 (1986).
5. T.T. Kodas, S.E. Pratsinis, S.K. Friedlander, “Aerosol Formation and Growth in a Laminar Core Reactor”, J. Colloid Interface Sci., 111, 102-111 (1986).
6. S.E. Pratsinis, T.T. Kodas, M.P. Dudukovic, S.K. Friedlander, “The Effect of Aerosol Reactor Residence Time Distribution on Product Aerosol Characteristics”, Chem. Eng. Sci., 41, 693-700 (1986).
7. S.E. Pratsinis, S.K. Friedlander, A.J. Pearlstein, “Aerosol Reactor Theory: Stability and Dynamics of a Continuous Stirred Tank Aerosol Reactor”, AIChE J., 32, 177-185 (1986).
8. T.T. Kodas, S.K. Friedlander, S.E. Pratsinis, “Effect of Reactant Mixing on Fine Particle Production in a Tubular Flow Reactor”, Ind. Eng. Chem. Res., 26, 1999-2007 (1987).
9. T.T. Kodas, A. Sood, S.E. Pratsinis, “Production of Submicron Alumina Powder by a Turbulent Flow Aerosol Process”, Powder Tech., 50, 47-53 (1987).
10. S.E. Pratsinis, T.T. Kodas, A. Sood, “Design of Laminar Flow Condensers for Production of Monodisperse Aerosols”, Ind. Eng. Chem. Res., 27, 105-110 (1988).
11. S.E. Pratsinis, M.D. Zeldin, E.C. Ellis “Source Resolution of the Fine Carbonaceous Aerosol by Principal Component Stepwise Regression Analysis”, Environ. Sci. Technol., 22, 212-216 (1988).
12. S.E. Pratsinis, “Simultaneous Nucleation, Condensation and Coagulation in Aerosol Reactors”, J. Colloid Interface Sci., 124, 416-427 (1988).
13. K.S. Kim, S.E. Pratsinis, “Manufacture of Optical Waveguide Preforms by Modified Chemical Vapor Deposition”, AIChE J., 34, 912-921 (1988).
14. S.E. Pratsinis, K.S. Kim, “Particle Coagulation, Diffusion and Thermophoresis in Laminar Tube Flows”, J. Aerosol Sci., 20, 101-111 (1989).
15. S.E. Pratsinis, “Receptor Models for Ambient Carbonaceous Aerosols”, Aerosol Sci. Technol., 10, 258-266 (1989).
16. P. Biswas, X. Li, S.E. Pratsinis, “Optical Waveguide Preform Fabrication: Silica Formation and Growth in a High Temperature Reactor”, J. Appl. Phys., 65, 2445-2450 (1989).
17. G.M. Phanse, S.E. Pratsinis, “Theory for Production of Aerosols in Laminar Flow Condensers”, Aerosol Sci. Technol., 11, 100-119 (1989).
18. K.S. Kim, S.E. Pratsinis, “Modeling and Analysis of Modified Chemical Vapor Deposition of Optical Fiber Preforms”, Chem. Eng. Sci., 44, 2475-2482 (1989).
19. T.J. Brotherton, P.E. Pfannerstill, T. Creed, D.T. Heitkemper, J.A. Caruso, S.E. Pratsinis, “Evaluation of Low Volume Interfaces for Solvent Introduction to the Inductively Coupled Plasma: Applications to Flow Injection”, J. Anal. At. Spectrom., 4, 341-345 (1989).
20. J.D. Landgrebe, S.E. Pratsinis, “Gas Phase Manufacture of Particulates: The Interplay of Chemical Reaction and Aerosol Coagulation in The Free Molecular Regime”, Ind. Eng. Chem. Res., 28, 1474-1481 (1989).
21. Y. Tian, P. Biswas, S.E. Pratsinis, W.M. Hsieh, “Principal Component Analysis for Particulate Source Resolution in Clean Rooms”, J. Environ. Sci., 32 (6), 22-27 (1989).
22. S.E. Pratsinis, S.V.R. Mastrangelo, “Material Synthesis in Aerosol Reactors”, Chem. Eng. Prog., 85(5), 62-66 (1989).
23. Y. Tian, P. Biswas, S.E. Pratsinis, J.J. Wu, “Receptor Modeling for Contaminant Particle Source Apportionment in Clean Rooms”, Aerosol Sci. Technol., 12, 805-812 (1990).
24. K.S. Kim, S.E. Pratsinis, “Codeposition of SiO2-GeO2 during Production of Optical Fiber Preforms by Modified Chemical Vapor Deposition”, Intl. J. Heat Mass Trans., 33, 1977-1986 (1990).
25. J.D. Landgrebe, S.E. Pratsinis, S.V.R. Mastrangelo, “Nomographs for Vapor Synthesis of Ceramic Powders”, Chem. Eng. Sci., 45, 2931-2941 (1990).
26. J.D. Landgrebe, S.E. Pratsinis, “A Discrete-Sectional Model for Powder Production by Gas-Phase Chemical Reaction and Aerosol Coagulation in the Free Molecular Regime”, J. Colloid Interface Sci., 139, 63-86 (1990).
27. T. Pickle, D.T. Allen, S.E. Pratsinis, “The Sources and Size Distributions of Aliphatic and Carbonyl Carbon in Los Angeles Aerosol”, Atmos. Environ., 24A, 2221-2228 (1990).
28. S.E. Pratsinis, H. Bai, P. Biswas, M. Frenklach, S.V.R. Mastrangelo, “Kinetics of TiCl4 Oxidation”, J. Am. Ceram. Soc., 73, 2158-2162 (1990).
29. Y. Xiong, S.E. Pratsinis, “Gas Phase Production of Particles in Reactive Turbulent Flows”, J. Aerosol Sci., 22, 637-655 (1991).
30. D.T. Mylonas, D.T. Allen, S.H. Ehrman, S.E. Pratsinis, “The Sources and Size Distributions of Organonitrates in Los Angeles Aerosol”, Atmos. Environ., 25A, 2855-2861 (1991).
31. M.K. Akhtar, Y. Xiong, S.E. Pratsinis, “Vapor Synthesis of Titania Powder by Titanium Tetrachloride Oxidation”, AIChE J., 37, 1561-1570 (1991).
32. T. Hashman, S.E. Pratsinis, “The Thermodynamics of Vapor Synthesis of AlN from Aluminum Metal and its Halides”, J. Am. Ceram. Soc., 75, 920-928 (1992).
33. Y. Xiong, S.E. Pratsinis, S.V.R. Mastrangelo, “The Effect of Ionic Additives on Aerosol Coagulation”, J. Colloid Interf. Sci. 153, 106-117 (1992).
34. M.K. Akhtar, S.E. Pratsinis, S.V.R. Mastrangelo, “Dopants in Vapor Phase Synthesis of Titania Powders”, J. Amer. Ceram. Soc., 75, 3408-3416 (1992).
35. S.H. Ehrman, S.E. Pratsinis, J.R. Young, “Receptor Modeling of the Fine Aerosol at a Los
    Angeles Residential Site”, Atmos. Environ., 26B, 473-481 (1992).
36. Y. Xiong, S.E. Pratsinis, A. W. Weimer, “Modeling of the Formation of Boron Carbide Particles in an Aerosol Flow Reactor”, AIChE J., 38, 1685-1692 (1992).
37. A.W. Weimer, W.G. Moore, R.P. Roach, J.E. Hitt, R.S. Dixit, S.E. Pratsinis, “Kinetics of Carbothermal Reduction Synthesis of Boron Carbide”, J. Amer. Ceram. Soc., 75, 2509- 2514 (1992).
38. S.W. Lyons, Y. Xiong, T.L. Ward, T.T. Kodas, S.E. Pratsinis, “Role of Particle Evaporation during Synthesis of Lead Oxide by Aerosol Decomposition”, J. Mat. Res. 7, 3333-41(1992).
39. M. Xu, K. Willeke, P. Biswas, S.E. Pratsinis, “Impaction and Rebound of Particles at Acute Incident Angles”, Aerosol Sci. Technol., 18, 143-155 (1993).
40. G. Fotou, S.E. Pratsinis, “Technical Note: A Correlation for Particle Wall Losses by Diffusion in Dilution Chambers”, Aerosol Sci. Technol. 18, 213-218 (1993).
41. Y. Xiong, S.E. Pratsinis, “Formation of Agglomerate Particles by Coagulation and Sintering: I. A Two-Dimensional Solution to the Population Balance Equation”, J. Aerosol Sci. 24, 283-300 (1993).
42. Y. Xiong, M.K. Akhtar, S.E. Pratsinis, “Formation of Agglomerate Particles by Coagulation and Sintering: II.The Evolution of the Morphology of Aerosol Made Titania, Silica and Silica-Doped Titania”, J. Aerosol Sci. 24, 301-313 (1993).
43. F.E. Kruis, K. Kusters, S.E. Pratsinis, B. Scarlett, “A Simple Model for the Evolution of the Characteristics of Aggregate Particles undergoing Coagulation and Sintering” Aerosol Sci. Technol. 19, 514-526 (1993).
44. K.A. Kusters, S.E. Pratsinis, S.G. Thoma, D.M. Smith, “Modeling Ultrasonic Fragmentation of Suspended Particles”, Chem. Eng. Sci. 48, 4119-4127 (1993).
45. G.P. Fotou, S.E. Pratsinis, “Particle Coating of Silica Fibers by Aerosol and Sol-Gel Processes”, Ceram. Trans. 38, 737-747 (1993).
46. M.K. Akhtar, S.E. Pratsinis, S.V.R. Mastrangelo “Vapor Phase Synthesis of Al-doped Titania Powders” J. Mater. Res. 9, 1241-1249 (1994).
47. M.K. Akhtar, S. Vemury, S.E. Pratsinis, “Competition between TiCl4 Hydrolysis and Oxidation and its Effect on Product TiO2 Powder” AIChE J. 40, 1183-92 (1994).
48. S. Vemury, K.A. Kusters, S.E. Pratsinis, “Time-Lag for Attainment of the Self-Preserving
    Particle Size Distribution by Coagulation” J. Colloid Interface Sci. 165, 53-59 (1994).
49. G.P. Fotou, S.E. Pratsinis, P.A. Baron, “Coating of Silica Fibers by Ultrafine Particles in a Flame Reactor”, Chem. Eng. Sci. 49, 1651-1662 (1994).
50. M.K. Akhtar, G.G. Lipscomb, S.E. Pratsinis, “Monte Carlo Simulation of Coagulation and Sintering” Aerosol Sci. Technol. 21, 83-93 (1994).
51. M.K. Akhtar, S. Vemury, S.E. Pratsinis “The Role of Electrolytes in Aerosol Synthesis of TiO2” NanoStructured Materials 4, 537-543 (1994).
52. S.E. Pratsinis, “Motor Vehicle Contributions to Fine Carbonaceous Aerosol in Los Angeles” Aerosol Sci. Technol. 21, 360-366 (1994).
53. E. Otto, F. Stratmann, H. Fissan, S. Vemury, S.E. Pratsinis “Quasi-Self-Preserving Log-Normal Size Distributions in Transition Regime”, Part. Part. Syst. Char. 11, 359-66 (1994).
54. G.P. Fotou, S. Vemury, S.E. Pratsinis, “Synthesis and Evaluation of Titania Powders for Photocatalysis of Phenol”, Chem. Eng. Sci. 49, 4939-48(1994).
55. K.A. Kusters, S.E. Pratsinis, S.G. Thoma, D.M. Smith, “Energy Size Reduction Laws for Ultrasonic Grinding”, Powder Technology 80, 253-263 (1994).
56. K.A. Kusters, S.E. Pratsinis, “Strategies for Control of Ceramic Powder Synthesis by Gas-to-Particle Conversion”, Powder Technology 82, 78-91 (1995).
57. Y. Xiong, S.W. Lyons, T.T. Kodas, S.E. Pratsinis, “Volatile Metal Oxide Evaporation during Aerosol Decomposition”, J. Amer. Ceram. Soc. 78, 2490-96 (1995).
58. A. Adetayo, J.D. Litster, S.E. Pratsinis, B.J. Ennis, “Population Balance Modelling of Drum Granulation of Materials with Wide Size Distributions”, Powder Technol. 82, 37-49(1995)
59. S. Vemury, S.E. Pratsinis, “Self-Preserving Size Distributions of Agglomerates” J. Aerosol Sci. 26, 175-185 (1995) and erratum 26, 701 (1995).
60. S.E. Pratsinis, G. Wang, S. Panda, A. Weimer and T. Guiton “Aerosol Synthesis of AlN by Nitridation of Aluminum Vapor and Clusters” J. Materials Res. 10, 512-520 (1995).
61. A. Gutsch, S.E. Pratsinis, F. Loffler, “Agglomerate Stucture and Growth Rate by Trajectory Calculations of Monomer-Cluster Collisions”, J. Aerosol Sci. 26, 187-199 (1995).
62. G.P. Fotou, S.E. Pratsinis, N. Pinto, “Surface Area Enhancement of Silica Fibers by Sol-Gel Processes”, J. Non-Crystalline Solids 183, 135-143 (1995).
63. G.P. Fotou, Y.S. Lin, S.E. Pratsinis, “Hydrothermal Stability of Pure and Modified Microporous Silica Membranes”, J. Mater. Sci. 30, 2803-8, (1995).
64. S. Vemury, S.E. Pratsinis, “Corona-Assisted Flame Synthesis of Ultrafine Titania Particles”, Appl. Phys. Lett. 66, 3275-7 (1995).
65. S. Panda, S.E. Pratsinis “Modeling the Synthesis of Aluminum Particles by Evaporation- Condensation in an Aerosol Flow Reactor”, Nanostructured Mater. 5, 755-68 (1995).
66. G.P. Fotou, S.J. Scott, S.E. Pratsinis, “The Role of Ferrocene in Flame Synthesis of Silica”, Combustion and Flame 101, 529-38 (1995).
67. S. Vemury, S.E. Pratsinis, “Dopants in Flame Synthesis of Titania”, J. Amer. Ceram. Soc. 78, 2984-92 (1995).
68. S.E. Pratsinis, W. Zhu, S. Vemury, “The Role of Gas Mixing in Flame Synthesis of Titania Powders” Powder Technol. 86, 87-93 (1996).
69. P.T. Spicer, S.E. Pratsinis, “The Evolution of Floc Structure and Size Distribution during Shear-Induced Flocculation”, Water Research , 30, 1046-1051 (1996).
70. P. T. Spicer, S.E. Pratsinis “Coagulation and Fragmentation: Universal Steady-State Particle Size Distribution” AIChE J. 42, 1612-1620 (1996)
71. S.E. Pratsinis, S. Vemury, “Particle Formation in Gases: A Review” Powder Technol. 88, 267-73 (1996).
72. L. Gradon, S.E. Pratsinis, A. Podgorski, S.J. Scott, S. Panda “Retention of Inhaled Particles in Rat Lungs Including Toxic and Overloading Effects” J. Aerosol Sci. 27, 487-503 (1996).
73. G.P. Fotou, S.E. Pratsinis, “Photocatalysis of Phenol and Salicylic Acid by Aerosol-Made and Commercial Titania Powders”, Chem. Eng. Commun., 151, 251-69 (1996).
74. G. Xomeritakis, S.E. Pratsinis, Y.S. Lin, “Analysis of Ceramic Membrane Modification by CVD”, J. Chem. Vapor Deposition , 4, 173-196 (1996).
75. P.T. Spicer, S.E. Pratsinis, M. Trennepohl, G.H. Meesters “Coagulation and Fragmentation: The Variation of Shear Rate and the Time Lag for Attainment of Steady State” Ind. Eng. Chem. Res. 35, 3074-80 (1996).
76. S. Vemury, S.E. Pratsinis, “Charging and Coagulation during Flame Synthesis of Silica Particles”, J. Aerosol Sci. 27, 951-966 (1996).
77. W. Zhu, S.E. Pratsinis, “Flame Synthesis of Nanosize Particles: Effect of Flame Configuration and Oxidant Composition” in Nanotechnology, ACS Symposium Series G.-M. Chow and K.E. Gonsalves Eds., 622, 64-78 (1996).
78. A. Gurav, T. Plyum, T.T. Kodas, S.E. Pratsinis, “Grain Growth and Densification in PdO Particles during Spray Pyrolysis”, Chem. Eng. Commun., 151, 211-26 (1996).
79. P. T. Spicer, W. Keller, S.E. Pratsinis “The Effect of Impeller Configuration on Floc Size and Structure during Shear-Induced Flocculation” J. Colloid Interf. Sci. 184,112-22 (1996).
80. S.R. Thomas, L. Gradon, S.E. Pratsinis, R.G. Pratt, G.P. Fotou, A.J. McGoron, A.L. Podgorski, R.W. Millard “Perfluorocarbon Compound aerosols for Delivery to the Lung as Potential F-19 NMR Reporters of Regional Pulmonary pO2”, Investigative Radiology, 32(1), 29-38 (1997).
81. S. Vemury, C. Jansen, S.E. Pratsinis, “Coagulation of Symmetric and Asymmetric Bipolar Aerosols”, J. Aerosol Sci. 28,599-611 (1997).
82. S. Vemury, S.E. Pratsinis, L. Kibbey “Electrically-Controlled Flame Synthesis of Nanophase TiO2, SiO2 and SnO2 Powders”, J. Mater. Res. 12, 1031-1042 (1997).
83. D. Lindackers, M.G.D. Strecker, P. Roth, C. Jansen, S.E. Pratsinis, ” Formation and Growth of SiO2 Particles in Low Pressure H2/O2/Ar Flames doped with SiH4″, Combust. Sci. Technol. 123, 287-315 (1997).
84. J. Hyeon-Lee, G. Beaucage, S.E. Pratsinis “Aero-Sol-Gel Synthesis of Nanostructured Silica Powders”, Chem. Mater. 9, 2400-03 (1997).
85. W. Zhu, S.E. Pratsinis, “Synthesis of SiO2 and SnO2 Particles in Diffusion Flame Reactors”, AIChE J. 43, 2657-64 (1997).
86. V. Haas, R. Birringer, H. Gleiter, S.E. Pratsinis, “Synthesis of Nanostructured Powders in an Aerosol Flow Condenser”, J. Aerosol Sci. 28, 1443-1453 (1997).
87. P.W. Morrison Jr., R. Raghavan, A.J. Timpone, C.P. Artelt, S.E. Pratsinis “In-situ Fourier Transform Infrared Characterization of Electrically Assisted Flame Synthesis of TiO2 Particles”, Chem. Mater. 9, 2702-08 (1997).
88. C. Artelt, S. Sanders, S. E. Pratsinis and R. G. Jenkins, “Flame Aerosol Synthesis of Carbon Nanoparticles in the Presence of Electric Fields” Proceedings of the Symposium on Innovative Processing and Synthesis of Ceramics, Glasses, and Composites , Ceramic Transactions, v. 85, Amer. Ceram. Soc., Westerville, OH, pp. 27-39 (1997).
89. S. Farquhanson, S. Charpenay, M.B. DiTaranto, P.A. Rosenthal, W. Zhu, S.E. Pratsinis, “In-Situ Particle Size and Gas Phase Analysis during Flame Synthesis of Nanosize Powders” in Synthesis and Characterization of Advanced Materials, ACS Symposium Series M.A. Serio, D.M. Gruen, R. Malhota Eds., 681, 170-186 (1998).
90. S.E. Pratsinis, “Flame Aerosol Synthesis of Ceramic Powders” Prog. Energy Combust. Sci. 24, 197-219 (1998).
91. P.T. Spicer, C. Artelt, S. Sanders, S.E. Pratsinis “Flame Synthesis of Composite Carbon Black – Fumed Silica Nanostructured Particles”, J. Aerosol Sci. 29, 647-59 (1998).
92. P.T. Spicer, S.E. Pratsinis, J.A. Raper, R. Amal, G. Bushell, G.M.H. Meesters “Effect of Shear Schedule on particle Size and Structure during Flocculation in Stirred Tanks” Powder Technology 97, 26-34 (1998).
93. S.E. Pratsinis, P.T. Spicer “Competition between Gas Phase and Surface Oxidation of
    TiCl4 during Synthesis of TiO2 Particles” Chem. Eng. Sci. 53, 1861-8 (1998).
94. J. Hyeon-Lee, G. Beaucage, S.E. Pratsinis, S. Vemury, “Fractal Analysis of Flame- Synthesized Nano-Structured Silica and Titania Powders Using Small Angle X-ray Scattering”, Langmuir, 14, 5751-5756 (1998).
95. H. Briesen, A. Furhmann and S.E. Pratsinis, The Effect of Precursor Composition and Concentration on Fumed Silica Characteristics, Chem. Eng. Sci. 53, 4105-4112 (1998).
96. F. Hoornaert, P.A.L. Waters, G.M.H. Meesters, S.E.Pratsinis, B.Scarlett, Agglomeration behavior of powders in a Lodige mixer granulator, Powder Technol., 96, 116-128 (1998).
97. G.D. Surender, G.P. Fotou, S.E. Pratsinis, “Titania-Based aqueous Phase Photocatalytic Remediation Processes: Strategies for Enhancement of Quantum Efficiency”, Trends in Chemical Engineering, 4, 145-159 (1998).
98. H. Briesen, A. Fuhrmann, S.E. Pratsinis, “Electrically Assisted Aerosol Reactors using Ring Electrodes”, Nanostructured Powders and their Industrial Applications, eds. G. Beaucage, G. Burns, H. Duen-Wu and J.E. Mark, MRS Symp. Proc., 520, 3-14 (1998).
99. S. Tsantilis, S.E. Pratsinis, V. Haas, “Modeling of Synthesis of Pd Powders in a Jet Aerosol Flow Condenser”, J. Aerosol Sci. 30, 785-803 (1999).
100. J. Flesch, P. T. Spicer, S.E. Pratsinis “Laminar and Turbulent Shear-Induced Flocculation of Fractal Aggregates” AIChE J. 45, 1114-1124 (1999).
101. G. Beaucage, J. Hyeon-Lee, D.J. Kohls, S.E. Pratsinis, “Aero-sol-gel Reactor for Nano-powder Synthesis“, J. Nanoparticle Res., 1, 379-392 (1999).
102. L. Davydov, P.G. Smirniotis, S.E. Pratsinis, “Novel Differential Reactor for the Measurement of Overall Quantum Yields”, Ind. Eng. Chem. Res. 38, 1376-1383 (1999).
103. A. Schild, A. Gutsch, H. Muehlenweg, D. Kerner, S.E. Pratsinis, “Simulation of Nanoparticle Production in Premixed Aerosol Flow Reactors by interfacing Fluid Mechanics and Particle Dynamics”, J. Nanoparticle Res. 1, 305-315 (1999).
     104. P. T. Spicer, S.E. Pratsinis, A.W. Wilemse, H.G. Merkus, B. Scarlett “Monitoring the Dynamics of Concentrated Suspensions by Enhanced Backward Light Scattering”, Particle & Part. Syst. Character., 16, 201-206 (1999).
104. H. Kammler, S.E. Pratsinis, “Scaling-up the production of nanosized SiO2-particles in a double diffusion flame aerosol reactor”, J. Nanoparticle Res. 1, 467-477 (1999).
105. T. Johannessen, S.E. Pratsinis, H. Livbjerg, Computational fluid-particle dynamics for the flame synthesis of alumina particles, Chem. Eng. Sci. 55, 177-191 (2000).
106. S. E. Pratsinis, O. Arabi-Katbi, C. M. Megaridis, P. W. Morrison Jr., S. Tsantilis, and H. Kammler, “Flame Synthesis of Spherical Nanoparticles“, Materials Science Forum, 343-6, 511-518 (2000).
107. L. Davydov, P.G. Smirniotis, S.E. Pratsinis, “The Intrinsic Catalytic Activity in Photoreactors”, Env. Sci. Technol., 34, 3435-3442 (2000).
108. H. Kammler, S.E. Pratsinis, “Electrically-assisted flame aerosol synthesis of fumed silica at high production rates”, Chem. Eng. Processing, 39, 219-227 (2000).
109. S. Tsantilis, S.E. Pratsinis “Evolution of Primary and Aggregate Particle Size Distributions during Coagulation and Sintering“, AIChE J. 46, 407-415 (2000).
110. H. Muhlenweg, A. Schild, A. Gutsch, C. Klasen, S. E. Pratsinis, “Product Engineering of Gas-Born Nano-Sized Particles, Materials Science Forum, 343-6, 941-948 (2000).
111. K.C. Song, S.E. Pratsinis, “The Effect of Alcohol solvents on the Porosity and Phase Composition of Titania”, J. Colloid Interf. Sci., 231, 289-298 (2000).
112. K. Wegner, S.E. Pratsinis, “Aerosol Flame Reactors for Synthesis of Nanoparticles”, Kona Powder and Particle, 18, 170-182 (2000).
113. K.C. Song, S.E. Pratsinis, “Synthesis of bimodally porous titania particles by hydrolysis of titanium tetraisopropoxide”, J. Mater. Res., 15, 2322-2329 (2000).
114. J. Kim, K.C. Song, S.E. Pratsinis, “The Effect of Hydrolysis Temperature on Synthesis of Bimodally Porous Titania”, J. Nanoparticle Res. 2, 419-424 (2000).
115. K.C. Song, S.E. Pratsinis, “Control of Phase and Pore Structure of Titania Powders using HCl and NH4OH Catalysts”, J. Am. Ceram. Soc., 84, 92-98 (2001).
116. W.J. Stark, K. Wegner, S.E. Pratsinis, A. Baiker, “Flame Aerosol Synthesis of Vanadia-Titania Nanoparticles: Structural and Catalytic Properties in SCR of NO by NH3”, J. Catal., 197, 182-191 (2001).
117. S. Tsantilis, H. Briesen, S.E. Pratsinis, “Sintering Rates of Flame Made Silica“, Aerosol Sci. Technol., 34, 237-246 (2001).
118. J. Kim, K.C. Song, S. Foncillas, S.E. Pratsinis, “Dopants for Synthesis of Stable Bimodally Porous Titania”, J. Europ. Ceram. Soc. 21, 2865-2874 (2001).
119. T. Johannessen, S.E. Pratsinis, H. Livbjerg, “Computational analysis of coagulation and coalescence in the flame synthesis of titania”, Powder Technol., 118, 242-250 (2001).
120. H. Kammler, R. Müller, O. Senn, S.E. Pratsinis, ”Synthesis of Silica-Carbon Particles in a Turbulent H2-Air Flame Aerosol Reactor”, AIChE J., 47, 1533-1543 (2001).
121. J. Kim, K.-C. Song, O. Wilhelm, S.E. Pratsinis, “Sol-Gel Synthesis and Spray Granulation of Porous Titania Powder”, Chemie Ingenieur Technik, 73, 461-468 (2001).
122. A. Röessler, G. Skillas, S.E. Pratsinis, “Nanopartikeln – Materialien der Zukunft”, Chemie in unsere Zeit, 35, 32-41 (2001).
123. H.K. Kammler, Mädler, L., and Pratsinis, S.E. “Flame synthesis of nanoparticles,” Chem. Eng. Technol. 24, 583-596 (2001).
124. J. Kim, O. Wilhelm, S.E. Pratsinis, “Packaging of Sol-Gel made Porous Nanostructured Titania Particles by Spray Drying”, J. Am. Ceram. Soc., 84, 2802-2808 (2001).
125. W.J. Stark, S.E. Pratsinis, A. Baiker, “Flame made Titania Silica Epoxidation Catalysts “, J. Catal., 203, 516-524 (2001).
126. O.I. Arabi-Katbi, S.E. Pratsinis, P.W. Morrison Jr., C.M. Megaridis, “Monitoring the Flame Synthesis of TiO2 Particles by in-situ FTIR Spectroscopy and Thermophoretic Sampling”, Combustion and Flame, 124, 560-572 (2001).
127. P. Spicer, O. Chaoul, S. Tsantilis, S.E. Pratsinis, “Titania formation by TiCl4 gas phase oxidation, surface growth and coagulation “, J. Aerosol Sci., 33, 17-34 (2002).
128. S. Tsantilis, H.K. Kammler and Pratsinis, S.E. “Population Balance Modeling of Flame Synthesis of Nanoparticles”, Chem. Eng. Sci., 57, 2139-56 (2002).
129. O.I. Arabi-Katbi, S.E. Pratsinis, P.W. Morrison Jr., “In situ Infrared Measurements on TiO2 Flames: Gas and Particle Concentrations”, AIChE J., 48, 59-68 (2002).
130. L. Madler, H. Kammler, R. Müller, S.E. Pratsinis, ”Controlled Synthesis of Nanostructured Particles by Flame Spray Pyrolysis”, J. Aerosol Sci., 33, 369-389 (2002).
131. H.K. Kammler, S.E. Pratsinis, P.W. Morrison Jr., B. Hemmerling, “Flame Temperature Measurements during Electrically-Assisted Aerosol Synthesis of Nanoparticles”, Combust. Flame, 128, 369-381 (2002).
132. K. Wegner, B. Walker, S. Tsantilis, S.E. Pratsinis, “Design of Metal Nanoparticle synthesis by Vapor Flow Condensation”, Chem. Eng. Sci. 57, 1753-1762 (2002).
133. K. Wegner, W.J. Stark, S.E. Pratsinis, “Flame-Nozzle Synthesis of Nanoparticles with Closely Controlled Size, Morphology and Crystallinity”, Mat. Lett. 55, 318-21(2002).
134. L. Madler, W.J. Stark, S.E. Pratsinis,”Flame-made Ceria Nanoparticles”, J. Mater. Res., 17, 1356-62 (2002).
135. H. Muhlenweg, A. Gutsch, A. Schild, S.E. Pratsinis, “Process simulation of gas-to-particle-synthesis via population balances: investigation of three models”, Chem. Eng. Sci., 57, 2305-22 (2002).
136. L. Maedler, S.E. Pratsinis,”Bismuth Oxide Nanoparticles by Flame Spray Pyrolysis”, J. Amer. Ceram. Soc., 85, 1713-8 (2002).
137. T. Tani, L. Mädler, S.E. Pratsinis, “Synthesis of ZnO/SiO2 Composite Nanoparticles by Flame Spray Pyrolysis”, J. Mater. Sci., 37, 4627-4632 (2002).
138. L. Madler, W.J. Stark, S.E. Pratsinis, ”Rapid Synthesis of Stable ZnO Quantum Dots”, J. Appl. Phys., 92, 6537-40 (2002).
139. W.J. Stark, H. Kammler, R. Strobel, A. Baiker, S.E. Pratsinis, “Flame-made TiO2/SiO2 Epoxidation Catalysts: Towards Large Scale Production”, Ind. Eng. Chem. Res. 41, 4921-4927 (2002).
140. W.J. Stark, S.E. Pratsinis, A. Baiker, “Heterogeneous Catalysis by Flame-Made Nanoparticles”, Chemia, 56, 485-489 (2002).
141. J. Kim, O. Wilhelm, S.E. Pratsinis, “Nanoparticle Packaging”, Adv. Eng. Mater. 4, 494-496 (2002).
142. T. Tani, L. Mädler, S.E. Pratsinis “Homogeneous ZnO Nanoparticles”, J. Nanoparticle Res., 4, 337-343 (2002).
143. W.J. Stark, A. Baiker, S.E. Pratsinis, “Nanoparticle Opportunities: Pilot-scale Flame Synthesis of Vanadia/Titania Catalysts”, Part. Part. Syst. Charact. 19, 306-311 (2002).
144. Y. Itoh, I. W. Lenggoro, S. E. Pratsinis, K., Okuyama, “Agglomerate-free BaTiO3 Particles by Salt-Assisted Spray Pyrolysis”, J. Mater. Res., 17, 3222-3227 (2002).
145. T. Tani, L. Mädler, S.E. Pratsinis “Synthesis of a-Willemite Nanoparticles by Post-calcination of Flame-made ZnO/SiO2 Composites”, Part. Part. Syst. Charact. 19, 354-358 (2002).
146. W.J. Stark, R. Strobel, D. Gunther, A. Baiker, S.E. Pratsinis, “Flame-Made Titania-Silica Doped with Transition Metals: Structural Properties and Catalytic Behaviour in Epoxidation”, J. Mater. Chem., 12, 3620-25 (2002).
147. O.I. Arabi-Katbi, K. Wegner, S.E. Pratsinis, “Aerosol Synthesis of titania nanoparticles: effect of flame orientation and configuration “, Ann. Chim. Sci. Mat. 27 (6), 37-46 (2002).
148. W. J. Stark, S.E. Pratsinis, “Aerosol flame reactors for manufacture of nanoparticles”, Powder Technol., 126, 103-108 (2002).
149. R. Strobel, W.J. Stark, L. Maedler, S.E. Pratsinis, A. Baiker, “Flame-made Platinum/Alumina: Structural Properties and Catalytic Behaviour in Enantioselective Hydrogenation”, J. Catal., 213, 296-304, (2003).
150. R. Mueller, H.K. Kammler, K. Wegner, S.E. Pratsinis, “The OH-Surface Density of SiO2 and TiO2 by Thermogravimetric analysis”, Langmuir, 19, 160-165 (2003).
151. L. Maedler, W. Stark, S.E. Pratsinis,”Simultaneous deposition of gold nanoparticles during flame synthesis of titania and silica”, J. Mater. Res., 18, 115-120 (2003).
152. K. Wegner, S.E. Pratsinis, “Nozzle Quenching Process for Controlled Flame synthesis of Titania Nanoparticles”, AIChE J., 49, 1667-1675 (2003).
153. R. Mueller, L. Maedler, S.E. Pratsinis, “Nanoparticle Synthesis at High Production Rates by Flame Spray Pyrolysis”, Chem. Eng. Sci., 58, 1969-1976 (2003).
154. W.J. Stark, L. Maedler, M. Maciejewski, S.E. Pratsinis, A. Baiker, “Flame-Synthesis of Nanocrystalline Ceria/Zirconia”, Chem. Comm., (5): 588-589 (2003).
155. T. Tani, N. Watanabe, K. Takatori, S.E. Pratsinis, “Morphology of Oxide Particles made by the Emulsion Combustion Method”, J. Amer. Ceram. Soc., 86, 898-904 (2003).
156. H. Schulz, W. J. Stark, M. Maciejewski, S. E. Pratsinis, A. Baiker, “Flame-made nanocrystalline ceria/zirconia doped with alumina or silica: structural properties and enhanced oxygen exchange capacity, J. Mater. Chem., 13, 2979-84 (2003).
157. G. Barthelmes, S. E. Pratsinis, H. Buggisch “Particle size distribution and viscosity of suspensions undergoing shear-induced coagulation and fragmentation”, Chem. Eng. Sci., 58, 2893-2902 (2003).
158. O. Wilhelm, L. Maedler, S.E. Pratsinis,”Electrospray Evaporation and Deposition”, J. Aerosol Sci., 34, 815-836 (2003).
159. K. Nakaso, K. Okuyama, M. Shimada, S. E. Pratsinis “Effect of reaction temperature on CVD-made TiO2 primary particle diameter”, Chem. Eng. Sci., 58, 3327-3335 (2003).
160. Y. Itoh, I. W. Lenggoro, K. Okuyama, L. Maedler, S. E. Pratsinis “Size-tunable synthesis of highly crystalline BaTiO3 nanoparticles using Salt-Assisted Spray Pyrolysis”, J. Nanoparticle Res., 5, 191-198 (2003).
161. K. Wegner, S.E. Pratsinis, “Scale-up of nanoparticle synthesis in diffusion flame reactors”, Chem. Eng. Sci., 58, 4581-4589 (2003).
162. H.K. Kammler, S.E. Pratsinis, “Carbon-coated titania nanostructured particles: Continuous, one-step flame synthesis”, J. Mater. Res., 18, 2670-6 (2003).
163. W.J. Stark, M. Maciejewski, L. Maedler, S.E. Pratsinis, A. Baiker, “Flame-made nanocrystalline Ceria/Zirconia: Structural Properties and Dynamic Oxygen Exchange Capacity”, J. Catal., 220, 35-43 (2003).
164. H.K. Kammler, R. Jossen, P.W. Morrison Jr., S.E. Pratsinis, G. Beaucage “The effect of external electric fields during flame synthesis of titania”, Powder Technol., 135, 310-20 (2003).
165. T. Fujimoto, Y. Kuga, S. E. Pratsinis, K., Okuyama, “Unipolar Ion Charging and Coagulation during Aerosol Formation by Chemical Reaction”, Powder Technol., 135, 321-35 (2003).
166. R. Strobel, F. Krumeich, W. J. Stark, S. E. Pratsinis, A. Baiker, Flame spray synthesis of Pd/alumina catalysts and their behavior in enantioselective hydrogenation, J. Catal., 222, 307-314 (2004).
167. J. Kim, O. Wilhelm, S.E. Pratsinis, “Nanostructured Titania Powders by Hydrothermal Processing and Spray Drying”, J. Nanosci. Nanotechnol. 4, 226-232 (2004).
168. H.K. Kammler, G. Beaucage, R. Mueller, S.E. Pratsinis, “Structure of flame-made silica nanoparticles by ultra small-angle x-ray scattering”, Langmuir, 20,1915-1921 (2004).
169. R. Mueller, R. Jossen, S.E. Pratsinis, M. Watson, M.K. Akhtar, “Zirconia Nanoparticles made in Spray Flames at High Production Rates ”, J. Am. Ceram. Soc., 87, 197-202 (2004).
170. R. Mueller, H.K. Kammler, S.E. Pratsinis, A. Vidal, G. Beaucage, P. Burtscher “Non-agglomerated Dry Silica Nanoparticles”, Powder Technol., 140, 40-48 (2004).
171. T. Tani, K. Takatori, S.E. Pratsinis, “Dynamics of Hollow and Solid Alumina Particle Formation in Spray Flames”, J. Amer. Ceram. Soc., 87, 523-25 (2004).
172. S. Tsantilis, Pratsinis, S.E. “Narrowing the Size Distribution of Aerosol-made Titania by Surface Growth and Coagulation”, J. Aerosol. Sci., 35, 405-420 (2004).
173. T. Tani, K. Takatori, S.E. Pratsinis, “Evolution of the Morphology of Zinc Oxide Silica Particles made by Spray Combustion”, J. Amer. Ceram. Soc., 87, 365-70 (2004).
174. T. Sahm, L. Madler, A. Gurlo, N. Basran, S.E. Pratsinis, U. Weimar, “Flame Spray Synthesis of tin oxide nanoparticles for gas sensing”, Sens. Actuators B, 98, 148-153 (2004).
175. O. Wilhelm, I. Exnar, E.de Chambrier, M. Crouzet, S.E. Pratsinis, ”Electrochemical performance of granulated titania nanoparticles”, J. Power Sources, 134, 197-201 (2004).
176. R. Mueller, R. Jossen, H. Kammler, S.E. Pratsinis, M.K. Akhtar, “Growth of zirconia particles made by flame spray pyrolysis”, AIChE J., 50, 3085-3094 (2004).
177. S. Tsantilis, S. E. Pratsinis, “Soft- and Hard-Agglomerate Aerosols made at High Temperatures”, Langmuir, 20, 5933-5939 (2004).
178. M. Kaelin, H. Zogg, A.N. Tiwari, O. Wilhelm, S.E. Pratsinis, T. Meyer “Electrosprayed and Selenized Cu/In Metal Particle Films“, Thin Solid Films, 457, 391-396 (2004).
179. G. Beaucage, H. Kammler, R. Mueller, R. Strobel, N. Agashe, S.E. Pratsinis, T. Narayanan, “Probing the dynamics of nanoparticle growth in a flame using synchrotron radiation“, Nature Materials, 3 (6), 370-373 (2004).
180. S.R. Veith, S.E. Pratsinis, E. Hughes, G. Vuataz, “Restricted Diffusion in Silica Particles measured by pulsed-field gradient NMR“, J. Colloid Interf. Sci. 274, 216-28 (2004).
181. G. Beaucage, H. Kammler, S.E. Pratsinis, “Particle size distributions from small-angle scattering using global scattering functions“,J. Appl. Cryst. 37, 523-535 (2004).
182. S.R. Veith, S.E. Pratsinis, E. Hughes, “Restricted diffusion and release of aromas from sol-gel-made porous silica particles “, J. Controlled Release, 99, 315-327 (2004).
183. S.R. Veith, S.E. Pratsinis, M. Perren, “Aroma Retention in Sol-Gel-Made Silica Particles“, J. Agric. Food Chem., 52, 5964-5971 (2004).
184. K. Wegner, S.E. Pratsinis, “Gas-Phase Synthesis of Nanoparticles: Scale-up and Design of Flame Reactors”, Powder Technol., 150, 117-122 (2005).
185. S. Loher, W.J. Stark, M. Maciejewski, A. Baiker, S.E. Pratsinis, D. Reichardt, F. Maspero, F. Krumeich, D.Gunther, Fluoro-apatite and calcium phosphate nanoparticles by flame synthesis, Chem. Mater. 17, 36-42 (2005).
186. S.R. Veith, S.E. Pratsinis, M. Perren, “Encapsulation and Retention of Decanoic Acid in Sol-Gel-made Silicas“, J. Colloid Interface Sci. 283, 495-502 (2005).
187. R. Strobel, S. E. Pratsinis, A. Baiker, “Flame-made Pd/La2O3/Al2O3 nanoparticles: thermal stability and catalytic behavior in methane combustion”, J. Mater. Chem., 15 (5), 605-610 (2005).
188. D. Perednis, O. Wilhelm, S.E. Pratsinis, L.J. Gauckler, ”Morphology and deposition of thin yttria-stabilized zirconia films using spray pyrolysis”, Thin Solid Films, 474, 84-95 (2005).
189. O. Wilhelm, S.E. Pratsinis, D. Perednis, L.J. Gauckler, ”Electrospray and pressurized spray deposition of yttria-stabilized zirconia films”, Thin Solid Films, 479, 121-129 (2005).
190. H. Schulz, L. Madler, S.E. Pratsinis, P. Burtscher, N. Mozner, “Transparent nanocomposites of radiopaque, flame-made Ta2O5/SiO2 particles in an acrylic matrix”, Adv. Functional Mater., 15(5), 830-837 (2005).
191. A. Teleki, S.E. Pratsinis, K. Wegner, R. Jossen, F. Krumeich “Flame-coating of titania particles with silica”, J. Mater. Res., 20, 1336-47 (2005).
192. A. Camenzind, R. Strobel, S.E. Pratsinis, “Cubic or Monoclinic Y2O3:Eu3+ nano-particles by one step flame spray pyrolysis”, Chem. Phys. Lett., 415, 193-7 (2005).
193. M.C. Heine, S.E. Pratsinis, “Droplet and Particle Dynamics during Flame Spray Synthesis of Nanoparticles”, Ind. Eng. Chem. Res., 44, 6222-6232 (2005).
194. R. Weiss, H. Ly, K. Wegner, S.E. Pratsinis, A. Steinfeld, “H2 production by Zn hydrolysis in a Hot-Wall Aerosol Reactor”, AIChE J., 51, 1966-70 (2005).
195. R. Jossen, S.E. Pratsinis, W. Stark, L. Madler, “Criteria for Flame-Spray Synthesis of Hollow, Shell-like or Inhomogeneous Oxides”, J. Amer. Ceram. Soc., 88, 1388-93 (2005).
196. A. Li Bassi, D. Cattaneo, V. Russo, C.E. Bottani, E. Barborini, T. Mazza, P. Piseri. P. Milani, F.O. Ernst, K. Wegner K, Pratsinis SE, Raman spectroscopy characterization of titania nanoparticles produced by flame pyrolysis: The influence of size and stoichiometry, J. Appl. Phys. 98 (7), 074305 (2005).
197. W.Y. Teoh, L. Madler, D. Beydoun, S.E. Pratsinis, R. Amal, “Direct (one-step) Synthesis of TiO2 and Pt/TiO2 Nanoparticles for Photocatalytic Mineralization of Sucrose”, Chem. Eng. Sci., 60, 5852-61 (2005).
198. R. Jossen, R. Mueller, S.E. Pratsinis, M. Watson and M.K. Akhtar, “Morphology and composition of spray-flame-made yttria-stabilized zirconia nanoparticles”, Nanotechnology, 16, S609-S617 (2005).
199. R. Strobel, J.D. Grundwalt, A. Camenzind, S. E. Pratsinis, A. Baiker, “Flame-made alumina supported Pd-Pt nanoparticles: Structural properties and catalytic behavior in methane combustion”, Catal. Letters, 104 (1-2), 9-16 Oct (2005).
200. W.J. Stark, J.D. Grundwaldt, M. Maciejewski, S.E. Pratsinis, A. Baiker, “Flame-made Pt/ceria/zirconia for low-temperature oxygen exchange”, Chem Mater., 17, 3552-8 (2005).
201. H. Schulz, L. Madler, R. Strobel, R. Jossen, S.E. Pratsinis, T. Johannessen, “Independent control of metal cluster and ceramic particle characteristics during one-step synthesis of Pt/TiO2”, J. Mater. Res., 20, 2568-77 (2005).
202. M.J. Height, S.E. Pratsinis, O. Mekasuwandumrong, P. Praserthdam “Ag-ZnO catalysts for UV-photodegradation of methylene blue”, Appl. Catal. B – Env., 63, 305-12(2006).
203. K. Wegner, H.C. Ly, R. Weiss, S.E. Pratsinis, A. Steinfeld, “In-situ formation and hydrolysis of Zn nanoparticles for H2 production by the 2-step ZnO/Zn water-splitting thermochemical cycle”, Int. J. Hydrogen Energy, 31, 55-61 (2006).
204. F.O. Ernst, S.E. Pratsinis, “Self-Preservation and Gelation during Shear-induced Coagulation”, J. Aerosol Sci., 37, 123-142 (2006).
205. L. Mädler, A. Roessler, S.E. Pratsinis, T. Sahm, A. Gurlo, N. Barsan, U. Weimar ”Direct formation of highly porous gas-sensing films by in-situ thermophoretic deposition of flame-made Pt/SnO2 nanoparticles”, Sensors and Actuators B: Chemical, 114, 283-295 (2006).
206. M.J. Height, L. Madler, S.E. Pratsinis, F. Krumeich, “Nanorods of ZnO made by Flame Spray Pyrolysis”, Chem. Mater., 18, 572-578 (2006).
207. M.C. Heine, L. Mädler, R. Jossen, S.E. Pratsinis, “Direct measurement of entrainment during nanoparticle synthesis in spray flames”, Comb. & Flame, 144, 809-20 (2006).
208. L. Mädler, T. Sahm, A. Gurlo, J.-D. Grunwaldt, N. Barsan, U. Weimar, S.E. Pratsinis, “Sensing low CO concentrations using flame-spray-made Pt/SnO2”, J. Nanoparticle Res. 8, 783-796 (2006).
209. A. Teleki, S.E. Pratsinis, K. Kalyanasundaram, P. Gouma “Sensing of organic vapors by flame-made TiO2 nanoparticles”, Sens. Actuat. B: Chemical, 119, 683-690 (2006).
210. R. Grass, S. Tsantilis, S.E. Pratsinis, “Design of High-Temperature, Gas-Phase Synthesis of Hard or Soft TiO2 Agglomerates”, AIChE J., 52, 1318-25 (2006). Cover page of the April 2006 issue of this journal.
211. R. Jossen, M.C. Heine, S.E. Pratsinis and M.K. Akhtar, “Thermal stability of flame-made zirconia-based mixed oxides”, CVD Journal, 12, 614-619 (2006).
212. S.C.G. Leeuwenburgh, M.C. Heine, J.G.C. Wolke, S.E. Pratsinis, J. Schoonman, J.A. Jansen “Morphology of calcium phosphate coatings for biomedical applications deposited using electrostatic spray deposition”, Thin Solid Films, 503, 69-78 (2006).
213. B. Schimmoeller, H. Schultz, S.E. Pratsinis, A. Bareiss, A. Reitzmann, B. Kraushaar-Czarnetzki, “Ceramic foams directly-coated with flame-made V2O5/TiO2 for synthesis of phthalic anhydride”, J. Catal., 243, 82-92 (2006).
214. R. Wengeler, A. Teleki, M. Vetter, S.E. Pratsinis, H. Nirschl, “High pressure dispersion – fragmentation of flame-made silica agglomerates”, Langmuir, 22, 4928-4935 (2006).
215. R. Strobel, M. Maciejewski, A. Baiker, S. E. Pratsinis, Flame-derived Pt/Ba/CexZr1-xO2: Influence of support on thermal deterioration and behavior as NOx storage-reduction catalysts, J. Catal., 243, 229-238 (2006).
216. R. Strobel, M. Piacentini, L. Mädler, M. Maciejewski, A. Baiker, S. E. Pratsinis, Two-nozzle flame synthesis Pt/Ba/Al2O3 for NOx storage, Chem. Mater. 18, 2532-7 (2006).
217. R. Strobel, M. Maciejewski, S. E. Pratsinis, A. Baiker, Unprecedented formation of metastable monoclinic BaCO3 nanoparticles, Thermochim. Acta, 445, 23-26 (2006).
218. M. Piacentini, R. Strobel, M. Maciejewski, S.E. Pratsinis, A. Baiker, “Flame-made Al2O3 supported Pt-Ba NOx storage-reduction catalysts: Structural properties and behavior in lean-NOx storage reduction, J. Catal., 243, 43-56 (2006).
219. R. Strobel, A. Baiker, S.E. Pratsinis, “Aerosol flame synthesis of catalysts: a Review”, Adv. Powder Technol., 17, 457-80 (2006).
220. F.O. Ernst, A. Tricoli, S.E. Pratsinis, A. Steinfeld, “Co-Synthesis of H2 and ZnO by in-situ Zn Aerosol Formation and Hydrolysis”, AIChE J., 52, 3297-3303 (2006).
221. M.C. Heine, S.E. Pratsinis, “High Concentration Agglomerate Dynamics at High Temperatures”, Langmuir, 22, 10238-10245 (2006).
222. S. Hannemann, J.-D. Grunwaldt, P. Lienemann, D. Günther, F.Krumeich, S.E. Pratsinis, A. Baiker, “Combination of Flame Synthesis and High-Throughput Experimentation: The Preparation of Alumina-supported Noble Metal Particles and Their Application in the Partial Oxidation of Methane”, Appl. Catal. A-General, 316, 226-239 (2007).
223. R. Jossen, M.C. Heine, S.E. Pratsinis, S. Augustine, M.K. Akhtar, Thermal stability and catalytic activity of flame-made silica-vanadia-tungsten oxide-titania, Appl. Catal. B-Environmental, 69, 181-188 (2007).
224. W.Y. Teoh, R. Amal, L. Mädler, S.E. Pratsinis, “Flame sprayed visible light – active Fe- TiO2 for photomineralization of oxalic acid”, Catal. Today, 120, 203-213 (2007).
225. F.O. Ernst, H.K. Kammler, A. Roessler, S.E. Pratsinis, W.J. Stark, J. Ufheil, P. Novák, “Electrochemically Active Flame-Made Nanosized Spinels: LiMn2O4, Li4Ti5O12 and LiFe5O8“, Mater. Chem. Phys., 101, 372-378 (2007).
226. M.C. Heine, S.E. Pratsinis, “Polydispersity of Primary Particles in Agglomerates made by Coagulation and Sintering” J. Aerosol Sci., 38, 17-38 (2007).
227. F. Rohner, F.O. Ernst, M. Arnold, M. Hilbe, R. Biebinger, F. Ehrensperger, S.E. Pratsinis, W. Langhans, R.F.Hurrell, M.B. Zimmermann “Synthesis, characterization, bioavailability in rats of ferric phosphate nanoparticles”, J. Nutr., 137, 614-9 (2007).
228. W.Y. Teoh, F. Denny, D. Friedmann, R. Amal, L. Mädler, S.E. Pratsinis, “Photocatalytic mineralisation of organic compounds: A comparison of flame-made TiO2 catalysts”, Top. Catal., 44, 489-497 (2007).
229. A. Camenzind, R. Strobel, S.E. Pratsinis, “Luminescence and crystallinity of flame-made Y2O3:Eu3+ nanoparticles”, Adv. Powder Technol., 18, 5-22 (2007).
230. A. Wortmann, A. Kistler-Momotova, R. Zenobi, M.C. Heine, O.Wilhelm, S.E. Pratsinis “Shrinking Droplets in Electrospray Ionization and Their Influence on Chemical Equilibria”, J. Amer. Soc. Mass Spectr., 18, 385-393 (2007) & issue #3 cover page.
231. S. Somboonthanakij, O. Mekasuwandumrong, J. Panpranot, T. Nimmanwudtipong, R. Strobel, S.E. Pratsinis, P. Praserthdam, Characteristics and catalytic properties of Pd/SiO2 synthesized by one-step flame spray pyrolysis in liquid-phase hydrogenation of 1-heptyne, Catal. Lett., 119, 346-352 (2007).
232. M.C. Heine, S.E. Pratsinis, “Agglomerate TiO2 Aerosol Dynamics at High Concentration”, Part. Part. Syst. Charact. 24, 56-65 (2007).
233. M.C. Heine, S.E. Pratsinis, “Brownian coagulation at high concentrations”, Langmuir, 23, 9882-9890 (2007).
234. R. Strobel, S.E. Pratsinis, “Flame aerosol synthesis of smart nanostructured materials”, J. Mater. Chem., 17, 4743 – 4756 (2007). Feature article in that journal issue.
235. A. Teleki, L. Wengeler, R. Wengeler, H. Nirschl, S.E. Pratsinis, “Distinguishing between aggregates and agglomerates of flame-made TiO2 by high pressure dispersion” Powder Technol., 181, 292-300 (2008).
236. H. Schulz, S. E. Pratsinis, H. Rüegger, J. Zimmermann, S. Klapdohr, U. Salz, ”Surface functionalization of radiopaque Ta2O5/SiO2 for nanocomposites”, Colloid. Surfaces A, 315, 79-88 (2008).
237. A. Teleki, N. Bjelobrk, S.E. Pratsinis, “Flame-made Nb- and Cu-doped TiO2 sensors for CO and ethanol”, Sensors and Actuators B: Chem., 130, 449-457 (2008).
238. A. Camenzind, H. Schulz, A. Teleki, T. Narayanan, G. Beaucage, S.E. Pratsinis, “Flame synthesis of metal oxide nanoparticles: Evolution of SiO2 nanostructure in diffusion flame reactors”, Eur. J. Inorg. Chem., 6, 911-918 (2008).
239. A. Tricoli, M. Graf, F. Mayer, S. Kühne, A. Hierlemann, S.E. Pratsinis “Micropatterning Layers by Flame Aerosol Deposition – Annealing”, Adv. Mater., 20, 3005-10 (2008).
240. F.O. Ernst, R.Buchel, R. Strobel, S.E. Pratsinis, “One-Step Flame-Synthesis of Carbon-Embedded and -Supported Platinum Clusters“, Chem. Mater.,20, 2117-2123 (2008).
241. S. Kühne, M. Graf, A. Tricoli, F. Mayer, S.E. Pratsinis, A. Hierlemann, “Wafer-level flame-spray-pyrolysis deposition of gas-sensitive layers on microsensors”, J. Micromechanics and Microengineering, 18, 035040 (2008).
242. H. Schulz, B. Schimmoeller, S. E. Pratsinis, U. Salz, T. Bock, ”Radiopaque Dental Adhesives: Dispersion of flame-made Ta2O5/SiO2 nanoparticles in methacrylic matrices”, J. Dentistry, 36, 579-587 (2008).
243. A. Tricoli, M. Graf, S.E. Pratsinis “Optimal doping for enhanced SnO2 Sensitivity and Thermal Stability”, Adv. Funct. Mater., 18, 1969-1976 (2008).
244. W.Y. Teoh, R. Setiawan, L. Mädler, J.-D. Grunwaldt, R. Amal, S.E. Pratsinis, “Ru-doped cobalt-zirconia nanocomposites by flame synthesis: Physicochemical and catalytic properties”, Chem. Mater., 20, 4069-4079 (2008).
245. A. Teleki, M.K. Akhtar, S.E. Pratsinis, “The Quality of SiO2 Coatings on flame-made TiO2 -based Nanoparticles” J. Mater. Chem., 18, 3547-3555 (2008). cover page of issue #30 of this journal (August 14, 2008).
246. B. Schimmoeller, H. Schultz, A. Ritter, A. Reitzmann, B. Kraushaar-Czarnetzki, A. Baiker, S.E. Pratsinis, “Structure of flame-made vanadia/titania and catalytic behavior in the partial oxidation of o-xylene”, J. Catal., 256, 74-83 (2008).
247. L. Wang, A. Teleki, S.E. Pratsinis, and P.I. Gouma, “Ferroelectric WO3 nanoparticles for acetone selective detection,” Chem. Mater. 20, 4794-4796 (2008).
248. R. Strobel, H.J. Metz, S.E. Pratsinis, “Brilliant yellow BiVO4 nanoparticles made in flames and in-situ annealed upon collection“, Chem. Mater., 20, 6346-6351 (2008).
249. A. Teleki, M.C. Heine, F. Krumeich, M.K. Akhtar, S.E. Pratsinis, “In-situ coating of flame-made TiO2 particles by nanosized SiO2 films” Langmuir, 24,12553-8 (2008).
250. R. Strobel, S.E. Pratsinis, “Direct synthesis of Maghemite, Magnetite and Wustite nanoparticles by flame spray pyrolysis“, Adv. Powder Technol., 20, 190–194 (2009).
251. B. Buesser, M.C. Heine, S.E. Pratsinis, “Coagulation of highly concentrated aerosols” J. Aerosol Sci., 40, 89-100 (2009).
252. T.J. Patey, R. Büchel, S.H. Ng, F. Krumeich, S.E. Pratsinis, P. Novak, Flame co-synthesis of LiMn2O4 and carbon nanocomposites for high power batteries, J. Power Sources, 189, 149-154 (2009).
253. A. Teleki, B. Buesser, M.C. Heine, F. Krumeich, M.K. Akhtar, S.E. Pratsinis, “The role of gas-aerosol mixing during in-situ coating of flame-made titania particles” Ind. Eng. Chem. Res., 48, 85-92 (2009).
254. R. Buchel, R. Strobel, F. Krumeich, A. Baiker, S.E. Pratsinis, “Influence of Pt location on BaCO3 or Al2O3 during NOx storage reduction “, J. Catal., 261, 201–207 (2009).
255. S.Y. Chew, T.J. Patey, O. Waser, S.-H. Ng, R. Büchel, A. Tricoli, F. Krumeich, J. Wang, H.K. Liu, S.E. Pratsinis, P. Novak, Thin nanostructured LiMn2O4 films by flame spray deposition and in situ annealing, J. Power Sources, 189, 449-453 (2009).
256. F.O. Ernst, A. Steinfeld, S.E. Pratsinis, Hydrolysis Rate of Submicron Zn Particles for Solar H2 Synthesis, Intnl. J. Hydrogen Energy, 34, 1166-1175 (2009).
257. M. Symalla, A. Drochner, H. Vogel, R. Büchel, S.E. Pratsinis, A. Baiker “Structure and NOx-storage behaviour of flame-made BaCO3 and Pt/BaCO3 nanoparticles “, Appl. Catal. B Env., 89, 41–48 (2009).
258. H. Lu, A. Khan, S.E. Pratsinis, P.G. Smirniotis, “Flame-made durable doped-CaO nanosorbents for CO2 capture”, Energy & Fuels, 23, 1093-1100 (2009).
259. R. Strobel, S.E. Pratsinis, “Flame Synthesis of Supported Platinum Group Metals for Catalysis and Sensors”, Platinum Met. Rev., 53, 11-20 (2009)
260. H. Lu, P.G. Smirniotis, F.O. Ernst, S.E. Pratsinis, “Nanostructured Ca-based sorbents with high CO2 uptake efficiency”, Chem. Eng. Sci., 64, 1936-1943 (2009).
261. S.-H. Ng, T.J. Patey, R. Büchel, F. Krumeich, J.-Z. Wang, H.-K. Liu, S.E. Pratsinis, P. Novak, Flame spray pyrolyzed vanadium oxide nanoparticles for lithium cathode batteries, Phys. Chem. Chem. Phys. , 11, 3748–3755 (2009).
262. A. Teleki, S.E. Pratsinis, Blue nano titania made in diffusion flames, Phys. Chem. Chem. Phys., 11, 3742 – 3747 (2009).
263. A. Teleki, M. Suter, P. Kidambi, O. Ergeneman, F. Krumeich, B.J. Nelson, S.E. Pratsinis, Hermetically-coated superparamagnetic Fe2O3 particles with SiO2 nanofilms, Chem. Mater., 21, 2094–2100 (2009).
264. J. Scheckman, P.H. McMurry, S.E. Pratsinis, Rapid Characterization of Agglomerate Aerosols by in situ Mass Mobility Measurements, Langmuir, 25, 8248–8254 (2009).
265. A. Tricoli, M. Righettoni, S.E. Pratsinis, Minimal cross-sensitivity to humidity during ethanol detection by SnO2-TiO2 solid solutions, Nanotechnology, 20, 315502 (2009).
266. H. Keskinen, A. Tricoli, M. Marjamäki, J.M. Mäkelä, S.E. Pratsinis, Size-selected agglomerates of SnO2 nanoparticles as gas sensors, J. Appl. Phys., 106, 084316(2009).
267. T. Elmoe, A. Tricoli, J.D. Grunwaldt, S.E. Pratsinis, Filtration of Nanoparticles: Evolution of Cake Structure and Pressure-Drop, J. Aerosol Sci., 40, 965–981 (2009).
268. A. Tricoli, M. Righettoni, S.E. Pratsinis, Anti – fogging nanofibrous SiO2 and nanostructured SiO2 – TiO2 films made by rapid flame deposition and in – situ annealing, Langmuir, 25, 12578–12584 (2009).
269. K.S. Chan, D.P. Nicolella, B.R. Furman, S.T. Wellinghoff, H.R. Rawls, S.E. Pratsinis, “Fracture Toughness of Zirconia Nanoparticle-Filled Dental Composites”, J. Mater. Sci., 44, 6117-6124 (2009).
270. F.M. Hilty, A. Teleki, F. Krumeich, R. Büchel, S.E. Pratsinis, W. Langhans, R.F. Hurrell, M.B. Zimmermann, “Development and optimization of iron- and zinc-containing nano-structured powders for nutritional applications”, Nanotechnology, 20, 475101 (2009).
271. R. Buchel, R. Strobel, A. Baiker, S.E. Pratsinis, “Effect of the proximity of Pt to Ce or Ba in Pt/Ba/CeO2 catalysts on NOx storage-reduction performance“, Top. Catal., 52, 1709–1712 (2009).
272. R. Buchel, R. Strobel, A. Baiker, S.E. Pratsinis, “Influence of Potassium in flame-derived Pt/K/Al2O3 NOx storage-reduction catalysts “, Top. Catal., 52, 1799–1802 (2009).
273. M.L. Eggersdorfer, D. Kadau, H.J. Herrmann, S.E. Pratsinis, “Fragmentation and Restructuring of Soft-Agglomerates under Shear”, J. Colloid Interface Sci., 342, 261-268 (2010).
274. A. Tricoli, S.E. Pratsinis, Dispersed Nanoelectrode Devices, Nature Nanotechnol., 5, 54 – 60 (2010).
275. B. Schimmoeller, F. Hoxha, T. Mallat, F. Krumeich, S.E. Pratsinis, A. Baiker, “Fine tuning the surface acid/base properties of single step flame-made Pt/alumina”, Appl. Catal. A Gen., 374, 48-57 (2010).
276. A. Camenzind, W. Caseri, S.E. Pratsinis, “Flame-made nanoparticles for nanocomposites”, Nano Today, 5, 48-65 (2010).
277. F. Hoxha, B. Schimmoeller, Z. Catl, A. Urakawa, T. Mallat, F. Krumeich, S.E. Pratsinis, A. Baiker,“Influence of support acid-base properties on the platinum-catalyzed enantioselective hydrogenation of activated ketones”, J. Catal., 271, 115-124 (2010).
278. A. Teleki, N. Bjelobrk, S.E. Pratsinis, “Continuous Surface Functionalization of flame-made TiO2”, Langmuir, 26, 5815–5822 (2010).
279. A. Camenzind, T. Schweizer; M. Sztucki, S.E. Pratsinis, “Structure & Strength of Silica-PDMS Nanocomposites”, Polymer, 51, 1796-1804 (2010).
280. M. Righettoni, A. Tricoli, S.E. Pratsinis, “Si:WO3 sensors for highly selective detection of acetone for easy diagnosis of diabetes by breath analysis”, Anal. Chem., 82, 3581–3587 (2010). Press release by ACS on May 19, 2010
281. F.M. Hilty, M. Arnold, M. Hilbe, A. Teleki, J.T.N. Knijnenburg, F. Ehrensberger, R.F. Hurrell, S.E. Pratsinis, W. Langhans, M.B. Zimmermann, “Iron from nano-structured compounds containing iron and zinc is highly bioavailable in rats, without detectable tissue iron accumulation”, Nature Nanotechnol., 5, 374 – 380 (2010).
282. M. Righettoni, A. Tricoli and S.E. Pratsinis, Thermally-stable, silica-doped -WO3 for sensing of acetone in the human breath, Chem. Mater., 22, 3152–3157 (2010).
283. R. Kubrin, A. Tricoli, A. Camenzind, S.E. Pratsinis, W. Bauhofer, “Flame Aerosol Deposition of Y2O3:Eu Nanophosphor Screens and their Photoluminescent Performance”, Nanotechnology, 21, 225603 (2010).
284. B. Schimmoeller, Y. Jiang, S.E. Pratsinis, A. Baiker,“Structure of flame-made vanadia/silica and catalytic behavior in the oxidative dehydrogenation of propane”, J. Catal., 274, 64–75 (2010).
285. P. Demokritou, R. Büchel, R.M. Molina, G.M. Deloid, J.D.Brain, S.E. Pratsinis, “Development and characterizationof a versatile engineered nanomaterial generation system suitable for toxicological studies”, Inhal. Toxicol., 22(S2), 107-116 (2010).
286. G.A. Sotiriou, S.E. Pratsinis, “Antibacterial activity of nanosilver ions and particles”, Environ. Sci. Technol., 44, 5649-5654 (2010).
287. B. Buesser, S.E. Pratsinis, “Aerosol Particle Coating: Texture, Thickness and Efficiency” Chem. Eng. Sci., 65, 5471-5481 (2010).
288. G.A. Sotiriou, T. Sannomiya, A. Teleki, F. Krumeich, J. Vörös, S.E. Pratsinis, “Non-toxic, dry-coated nanosilver for plasmonic biosensors”, Adv. Functional Mater., 20, 4250–4257 (2010) and frontispiece of that journal issue (#24).
289. M. J. Beier, B. Schimmoeller, T. W. Hansen, J. E. T. Andersen, S. E. Pratsinis and J.-D. Grunwaldt, “ Selective side-chain oxidation of alkyl aromatic compounds catalyzed by cerium modified silver catalysts”, J. Molecular Catal. A: Chem., 331, 40 – 49 (2010).
290. S.E. Pratsinis, Aerosol-based Technologies in Nanoscale Manufacturing: from Functional Materials to Devices through Core Chemical Engineering, AIChE J., 56, 3028-3035 (2010) and cover page of that journal issue (#12).
291. A. Tricoli, M. Righettoni, F. Krumeich, W.J. Stark, S.E. Pratsinis, Scalable flame synthesis of SiO2 nanowires: Dynamics of growth, Nanotechnol., 21, 465604 (2010).
292. R. Buchel, S.E. Pratsinis, A. Baiker, Influence of controlled spatial deposition of Pt and Pd in NOx storage-reduction catalysts on their efficiency, Appl. Catal. B Env., 101, 682–689 (2011).
293. F.M. Hilty, J.T.N. Knijnenburg, A. Teleki, F. Krumeich, R.F. Hurrell, S.E. Pratsinis, M.B. Zimmermann, “Addition of Mg and Ca to Nanostructured Fe2O3 Improves Solubility in Dilute Acid and Sensory Characteristics in Foods”, J. Food Sci., 76, N2-N10 (2011).
294. A. Vargas, I. Shnitko, A. Teleki, S. Weyeneth, S.E. Pratsinis, A. Baiker, Structural dependence of the efficiency of functionalization of silica-coated FeOx magnetic nanoparticles studied by ATR-IR, Appl. Surf. Sci. 257, 2861–2869 (2011).
295. G.A. Sotiriou, M. Schneider, S.E. Pratsinis, “Color-tunable nanophosphors by co-doping flame-made Y2O3 with Tb and Eu”, J. Phys. Chem. C, 115, 1084–1089 (2011).
296. F. Hoxha, E. Schmidt, T. Mallat, B. Schimmoeller, S.E. Pratsinis, A. Baiker, “Hydrogenation of acetophenone derivatives: tuning the enantioselectivity via the metal-support interaction”, J. Catal., 278, 94–101 (2011).
297. T. Rudin, K. Wegner, S.E. Pratsinis, “Uniform nanoparticles by flame-assisted spray pyrolysis (FASP) of low cost precursors”, J. Nanoparticle Res. 13, 2715-2725 (2011).
298. G.A. Sotiriou, A. Hirt, P.-Y. Lozach, A. Teleki, F. Krumeich, S.E. Pratsinis, “Hybrid silica-coated, Janus-like plasmonic-magnetic nanoparticles”, Chem. Mater., 23, 1985-1992 (2011).
299. A. Gröhn, B. Buesser, J Jokiniemi, S.E. Pratsinis, “Design of turbulent flame aerosol reactors by mixing-limited fluid dynamics”, Ind. Eng. Chem. Res. 50, 3159-68 (2011).
300. B. Schimmoeller, S.E. Pratsinis, A. Baiker, “Flame Aerosol Synthesis of Metal Oxide Catalysts with Unprecedented Structural and Catalytic Properties”, ChemCatChem 3, 1234-1256 (2011) cover page of that journal issue (#8).
301. B. Buesser, S.E. Pratsinis, “Design of Gas-phase Synthesis of Core-Shell Particles by Computational Fluid – Aerosol Dynamics”, AIChE J. 57, 3132-3142 (2011).
302. G.A. Sotiriou, A. Teleki, A. Camenzind, F. Krumeich, A. Meyer, S. Panke, S.E. Pratsinis, “Nanosilver on nanostructured silica: Antibacterial activity and Ag surface area”, Chem. Eng. J., 170, 547-554 (2011).
303. B. Buesser, A. Gröhn, S.E. Pratsinis, “Sintering Rate and Mechanism of TiO2 Nanoparticles by Molecular Dynamics”, J. Phys. Chem. C, 115, 11030-11035 (2011).
304. O. Waser, R. Büchel, A. Hintennach, P. Novak, S.E. Pratsinis, Continuous flame aerosol synthesis of carbon-coated nano-LiFePO4 for Li-ion batteries J. Aerosol Sci., 42, 657-667 (2011).
305. M.L. Eggersdorfer, D. Kadau, H.J. Herrmann, S.E. Pratsinis, “Multiparticle Sintering dynamics: From Fractal-like Aggregates to Compact Structures”, Langmuir, 27, 6358-67 (2011).
306. R. Strobel, S.E. Pratsinis, Effect of solvent composition on oxide morphology during flame spray pyrolysis of metal nitrates, Phys. Chem. Chem. Phys., 13, 9246-52 (2011)
307. G.A. Sotiriou, S.E. Pratsinis, “Engineering nanosilver as an antibacterial, biosensor and bioimaging material”, Curr. Opinion Chem. Eng. 1, 3-10 (2011).
308. S. Koirala, K. Gunugunuri, S.E. Pratsinis, P.G. Smirniotis“Effect of Zirconia Doping on the Structure and Stability of CaO-Based Sorbents for CO2 Capture During Extended Operating Cycles”, J. Phys. Chem. C. 115, 24804-24812 (2011).
309. B. Buesser, S.E. Pratsinis, “Design of Aerosol Coating Reactors: Precursor Injection”, Ind. Eng. Chem. Res. 24, 13831-13839 (2011).
310. M. Suter, O. Ergeneman, J. Zürcher, C. Moitzi, S. Pané, T. Rudin, S.E. Pratsinis, B.J. Nelson, C. Hierold, “A Photopatternable Superparamagnetic Nanocomposite: Material Characterization and Fabrication of Microstructures”, Sens. Actuat. B: Chem., 156, 433 – 443 (2011).
311. M.L. Eggersdorfer, S.E. Pratsinis, “The Structure of Agglomerates consisting of Polydisperse Particles”, Aerosol Sci. Technol., 46, 347–353 (2012).
312. G.A. Sotiriou, E. Diaz, M.S. Long, J. Godelski, J.D. Brain, S.E. Pratsinis, P. Demokritou, “A novel platform for pulmonary and cardiovascular toxicological characterization of inhaled engineered nanomaterials”, Nanotoxicol., 6, 680-690 (2012).
313. M.L. Eggersdorfer, D. Kadau, H.J. Herrmann, S.E. Pratsinis, “Aggregate morphology evolution by sintering: Number and diameter of primary particles”, J. Aerosol Sci, 46, 7-19 (2012).
314. R. Buchel, S.E. Pratsinis, A. Baiker “Mono- and bimetallic Rh and Pt NSR-catalysts prepared by controlled deposition of noble metals on support or storage component“, Appl. Catal. B Env., 113–114, 160-171 (2012).
315. B. Buesser, S.E. Pratsinis “Design of Nanomaterial Synthesis by Aerosol Processes”, Annual Rev. Chem. Biomol. Eng., 3, 103–27 (2012).
316. G.A. Sotiriou, M. Schneider, S.E. Pratsinis,“Green, Silica-Coated Monoclinic Y2O3:Tb3+ Nanophosphors: Flame Synthesis and Characterization”, J. Phys. Chem. C, 116, 4493-4499 (2012).
317. A. Gröhn, S.E. Pratsinis, K. Wegner, “Fluid-Particle Dynamics during Combustion Spray Aerosol Synthesis of ZrO2”, Chem. Eng. J., 191, 491-502 (2012).
318. T. Rudin, K. Tsougeni, E. Gogolides, S.E. Pratsinis, “Flame Aerosol Deposition of TiO2 Nanoparticle Films on Polymers and Polymeric Microfluidic Devices for on-Chip Phosphopeptide Enrichment”, Microelectronic Eng., 97, 341–344 (2012).
319. Y. Jiang, R. Büchel, J. Huang, F. Krumeich, S.E. Pratsinis, A. Baiker, “Efficient Solvent-free Hydrogenation of Ketones over Flame-made Bimetallic Pt-Pd/ZrO2 Catalysts”, ChemSusChem, 5, 1190-1194 (2012).
320. T. Rudin, S.E. Pratsinis, “Homogeneous Iron Phosphate Nanoparticles by Combustion of Sprays”, Ind. Eng. Chem. Res. 51, 7891-7900 (2012).
321. M. Righettoni, A. Tricoli, S. Gass, A. Schmidt, A. Amman, S.E. Pratsinis, “Breath acetone monitoring by portable Si:WO3 gas sensors”, Anal. Chem. Acta, 738, 69-75 (2012).
322. M.L. Eggersdorfer, A. Groehn, C.M. Sorensen, P.H. McMurry, S.E. Pratsinis, “Mass-Mobility Characterization of Flame-made ZrO2 Aerosols: Primary Particle Diameter & Extent of Aggregation”, J. Colloid Interface Sci. 387, 12–23 (2012).
323. G.A. Sotiriou, A. Meyer, J.T.N. Knijnenburg S. Panke, S.E. Pratsinis, “Quantifying the origin of nanosilver ions and their antibacterial activity”, Langmuir, 28, 15929–15936 (2012).
324. Y. Deligiannakis, G.A. Sotiriou, S.E. Pratsinis, “Antioxidant and Antiradical SiO2 Nanoparticles Covalently Functionalized with Gallic Acid”, ACS Appl. Mater. & Interf., 4, 6609-6617 (2012).
325. G.A. Sotiriou, C. Blattmann, S.E. Pratsinis, “Flexible multifunctional magnetically-actuated nanocomposite films”, Adv. Functional Mater., 23, 34-41 (2013).
326. T. Rudin, K. Wegner. S.E. Pratsinis, “Towards Carbon-Free Flame Spray Synthesis of Homogeneous Oxide Nanoparticles from Aqueous Solutions”, Adv. Powder Technol. 24, 632-642 (2013).
327. A. Pratsinis, P. Hervella, J.-C. Leroux, S.E. Pratsinis, G.A. Sotiriou, “Toxicity of silver nanoparticles in macrophages”, Small, 15, 2576–2584 (2013).
328. C. Hammond, J. Straus, M. Righettoni, S.E. Pratsinis, I. Hermans, “Nanoparticulate Tungsten Oxide for Catalytic Epoxidations”, ACS Catalysis, 3, 321-327 (2013).
329. M.L. Eggersdorfer, S.E. Pratsinis, “Restructuring of Aggregates and their Primary Particle Size Distribution during Sintering”, AIChE J. 59, 1118 – 1126 (2013).
330. J.T.N. Knijnenburg, F.M. Hilty, F. Krumeich, M.B. Zimmermann,, S.E. Pratsinis, “Multimineral nutritional supplements in a nano-CaO matrix”, J. Mater. Res. 28, 1129-1138 (2013).
331. S. Gass, J. Cohen, G. Pyrgiotakis, G.A. Sotiriou, S.E. Pratsinis, P. Demokritou, “A Safer Formulation Concept for Flame-Generated Engineered Nanomaterials”, ACS Sustainable Chemistry & Engineering, 1, 843-847 (2013).
332. O. Waser, M. Hess, A. Güntner, P. Novak, S.E. Pratsinis, Size Controlled CuO Nanoparticles for Li-ion batteries, J. Power Sources, 241, 415-422 (2013).
333. M. Righettoni, A. Schmidt, A. Amman, S.E. Pratsinis, Correlations between blood glucose and breath components from portable gas sensors and PTR-TOF-MS, J. Breath Res., 7, 037110 (2013).
334. G. Pyrgiotakis, Ch. Blattmann, S.E. Pratsinis, P. Demokritou, “Nanoparticle-nanoparticle interactions in biological media by Atomic Force Microscopy”, Langmuir, 29, 11385-11395 (2013).
335. G.A. Sotiriou, M. Visbal-Onufrak, A. Teleki, E. Juan, A. Hirt, S.E. Pratsinis, C. Rinaldi, Thermal energy dissipation by SiO2-coated plasmonic-superparamagnetic nanoparticles in alternating magnetic fields, Chem. Mater., 25, 4603−4612 (2013).
336. M.L. Eggersdorfer, S.E. Pratsinis, Agglomerates and Aggregates of Nanoparticles made in the Gas Phase, Adv. Powder Technol. 25, 71-90 (2014).
337. G.A. Sotiriou, F. Starsich, A. Dasargyri, M.C. Wurnig, F. Krumeich, A. Boss, J-C. Leroux, S.E. Pratsinis, “Photothermal Killing of Cancer Cells by the Controlled Plasmonic Coupling of Silica-coated Au/Fe2O3 Nanoaggregates”, Adv. Functional Mater., 24, 2818–2827 (2014) and frontispiece of that issue .
338. K. Fujiwara, Y. Deligiannakis, C.G. Skoutelis, S.E. Pratsinis, Visible-light active black TiO2-Ag/TiOx particles, Appl. Catal. B: Environ. 154-155, 9-15 (2014).
339. S. Fusco, M.S. Sakar, S. Kennedy, R. Bottani, F. Starsich, C. Peters, G.A. Sotiriou, S. Pané, S.E. Pratsinis, C. Hierold, D. Mooney & B. J. Nelson. “An Integrated Microrobotic Platform for On-demand, Targeted Therapeutic Interventions”, Adv. Mater. 26, 952-957 (2014) and frontispiece of that issue.
340. R. Büchel, A. Baiker, S. E. Pratsinis, “Effect of Ba and K addition and controlled spatial deposition of Rh in Rh/Al2O3 catalysts for CO2 hydrogenation” Applied Catalysis A: General, 477, 93-101 (2014).
341. A.J. Gröhn, M.L. Eggersdorfer, S.E. Pratsinis, K. Wegner, “On-line monitoring of primary and agglomerate particle dynamics”, J. Aerosol Sci., 73, 1–13 (2014).
342. R. Koirala, R. Büchel, S. E. Pratsinis, A. Baiker “Oxidative coupling of methane on flame-made Mn-Na2WO4/SiO2: Influence of catalyst composition and reaction conditions” Applied Catalysis A: General, 484,97-107 (2014).
343. M. Righettoni, S.E. Pratsinis, “Annealing dynamics of WO3 by in situ XRD”, Mater. Res. Bull. 59, 199-204 (2014).
344. A.J. Gröhn, S.E. Pratsinis, A. Sánchez-Ferrer, R. Mezzenga, K. Wegner, “Scale-up of Nanoparticle Synthesis by Flame Spray Pyrolysis”, Ind. Eng. Chem. Res. 53, 10734-42 (2014).
345. O. Waser, A.J. Gröhn, M.L. Eggersdorfer, S.E. Pratsinis, Air Entrainment during Flame Aerosol Synthesis of Nanoparticles, Aerosol Sci. Technol., 48, 1195–1206 (2014).
346. G.A. Sotiriou, G-D. Etterlin, A. Spyrogianni, F. Krumeich, J-C. Leroux, S.E. Pratsinis, Plasmonic biocompatible silver-gold alloyed nanoparticles”, Chem. Com., 50, 13559 – 13562 (2014).
347. R. Koirala, R. Buechel, F. Krumeich, S.E. Pratsinis, A. Baiker, “Oxidative Dehydrogenation of Ethane with CO2 over Flame-made Ga-loaded TiO2”, ACS Catal., 5, 690-702 (2015)
348. M. Righettoni, A. Amman, S.E. Pratsinis, “Breath analysis by nanostructured metal oxides as chemo-resistive gas sensors”, Mater. Today, 18, 63–171 (2015).
349. E. Goudeli, M.L. Eggersdorfer, S.E. Pratsinis, Coagulation – Agglomeration of Fractal-like Particles: Structure and Self-Preserving Size Distribution, Langmuir, 31, 1320-1327 (2015).
350. L.N.Y. Cao, J. Wang, H. Fissan, S. E. Pratsinis, M.L.Eggersdorfer, D.Y.H. Pui, The capacitance and charge of agglomerated nanoparticles during sintering, J. Aerosol Sci., 83, 1-11 (2015).
351. C.O. Blattmann, G.A. Sotiriou, S.E. Pratsinis, Rapid synthesis of flexible conductive polymer nanocomposite films, Nanotechnology, 26, 125601 (2015).
352. L.V. Nowack, T. Bunjaku, K. Wegner, S.E. Pratsinis, M. Luisier, V. Wood, Design and Fabrication of Microspheres with Hierarchical Internal Structure for Tuning Battery Performance, Advanced Science, 1500078 (2015).
353. B. Buesser, S.E. Pratsinis, Morphology & Crystallinity of Coalescing Nanosilver, J. Phys. Chem. C, 119, 10116-10122 (2015).
354. S. Fusco, H.-W. Huang, K.E. Peyer, C. Peters, M. Häberli, A. Ulbers, A. Spyrogianni, E. Pellicer, J. Sort, S.E. Pratsinis, B.J. Nelson, M.S. Sakar and S. Pané, “Shape-Switching Microrobots for Medical Applications: The Influence of Shape in Drug Delivery and Locomotion”, ACS Applied Materials & Interfaces, 7, 6803-6811 (2015).
355. K. Fujiwara, G.A. Sotiriou, S.E. Pratsinis, Enhanced Ag+ Ion Release from Aqueous Nanosilver Suspensions by Absorption of Ambient CO2, Langmuir 31, 5284-5290 (2015).
356. E. Goudeli, M.L. Eggersdorfer, S.E. Pratsinis, Aggregate Characteristics Accounting for the Evolving Fractal-like Structure during Coagulation & Sintering, J. Aerosol Sci., 89, 58-68 (2015).
357. M. Righettoni, A. Ragnoni, A.T. Güntner, C. Loccioni, S.E. Pratsinis, T.H. Risby, Monitoring breath markers under controlled conditions, J. Breath Res. 9, 047101(2015).
358. E. Goudeli, S.E. Pratsinis, Crystallinity Dynamics of Gold Nanoparticles during Sintering or Coalescence, AIChE J., 62, 589–598 (2016).
359. A.T. Güntner, M. Righettoni, S.E. Pratsinis, “Selective sensing of NH3 by Si-doped α-MoO3 for breath analysis”, Sensors and Actuators B: Chemical, 223, 266–273 (2016).
360. K. Fujiwara, U. Müller, S.E. Pratsinis, “Pd Subnano-Clusters on TiO2 for Solar-Light Removal of NO”, ACS Catalysis, 6, 1887-1893 (2016).
361. A. Teleki, F.L. Haufe, A.M. Hirt, S.E. Pratsinis, G.A. Sotiriou, “Highly scalable production of uniformly-coated superparamagnetic nanoparticles for triggered drug release from alginate hydrogels”, RSC Advances, 6, 21503-21510 (2016).
362. C.O. Blattmann, S.E. Pratsinis, “In situ measurement of conductivity during nanocomposite film deposition”, Applied Surface Science, 371, 329–336 (2016).
363. E. Goudeli, S.E. Pratsinis, Gas-Phase Manufacturing of Nanoparticles: Molecular Dynamics and Mesoscale Simulations, Particulate Science and Technology, 34, 483-493 (2016).
364. R. Koirala, S.E. Pratsinis, A. Baiker, “Synthesis of catalytic materials in flames: opportunities and challenges”, Chem. Soc. Rev., 45, 3053-3068 (2016)
365. A.T. Güntner, V. Koren, K. Chikkadi, M. Righettoni, S.E. Pratsinis, “E-nose sensing of low-ppb formaldehyde in gas mixtures at high relative humidity for breath screening of lung cancer?”, ACS Sensors, 1, 528-535 (2016).
366. E. Goudeli, A. Groehn, S.E. Pratsinis, Sampling and Dilution of Nanoparticles at High Temperature, Aerosol Sci. Technol. 50, 591-604 (2016).
367. A.T. Güntner, N. Pinau, D. Chie, F. Krumeich, S.E. Pratsinis, “Selective sensing of isoprene by Ti-doped ZnO for breath diagnostics”, J. Mater. Chem. B, 4, 5358 – 5366 (2016).
368. F. Wang, R. Büchel, A. Savitsky, M. Zalibera, D.Widmann, S.E. Pratsinis, W. Lubitz, F. Schüth, In Situ EPR Study of the Redox Properties of CuO-CeO2 Catalysts for Preferential CO Oxidation (PROX), ACS Catal., 6, 3520 – 3530 (2016).
369. E. Goudeli, M.L. Eggersdorfer, S.E. Pratsinis, Coagulation of Agglomerates consisting of Polydisperse Primary Particles, Langmuir, 32, 9276−9285 (2016).
370. F. Krumeich, O. Waser, SE Pratsinis. Thermal annealing dynamics of carbon-coated LiFePO4 nanoparticles studied by in-situ analysis. J. Solid State Chem. 242, 96-102 (2016).
371. R. Koirala, R. Buechel, S.E. Pratsinis, A. Baiker, Silica is Preferred over Single and Mixed Oxide as Support for CO2-assisted Cobalt-Catalytized Oxidative Dehydrogenation of Ethane”, Applied Catalysis A: General, 527, 96–108 (2016).
372. L. Posavec, J.T.N. Knijnenburg, F.M. Hilty, F. Krumeich, S.E. Pratsinis, M.B. Zimmermann, Dissolution and storage stability of nanostructured calcium carbonates and phosphates for nutrition, J. Nanopart. Res., 18, 310 (2016).
373. F.H.L. Starsich, G.A. Sotiriou, M.C. Wurnig, C. Eberhardt, A. Hirt, A. Boss, SE.Pratsinis, Silica-Coated Nonstoichiometric Nano Zn-Ferrites for Magnetic Resonance Imaging and Hyperthermia Treatment. Adv. Healthcare Mater., 5, 2698-2706 (2016).
374. K. Fujiwara, K.; S.E. Pratsinis, Atomically dispersed Pd on nanostructured TiO2 for NO removal by solar light, AIChE J., 63, 139-146 (2017).
375. G.A. Kelesidis, E. Goudeli, S.E. Pratsinis, Flame synthesis of functional materials and devices: Surface growth and aggregation, Proceedings of the Combustion Institute, 36, 29-50 (2017).

377 S. Mostrou R. Büchel, S.E. Pratsinis, J.A. van Bokhoven, Improving the ceria-mediated water and carbon dioxide splitting through the addition of chromium, Applied Catalysis A: General, 537, 40-49 (2017).

378. A. Spyrogianni, G.A. Sotiriou, D. Brambilla, J.-C. Leroux, S.E. Pratsinis. The effect of settling on cytotoxicity evaluation of SiO2 nanoparticles. J. Aerosol Sci. 108, 56-66 (2017).
379. G.N. Schädli, R. Büchel, S.E. Pratsinis, Nanogenerator power output: influence of particle size and crystallinity of BaTiO3, Nanotechnology, 28, 275705 (2017).
380. M.T. Matter, F. Starsich, M. Galli, M. Hilber, A.A. Schlegel, S. Bertazzo, S.E. Pratsinis, I.K. Herrmann, Developing a tissue glue by engineering the adhesive and hemostatic properties of metal oxide nanoparticles, Nanoscale, 9, 8418–8426 (2017).
381. G.A. Kelesidis, E. Goudeli, S.E. Pratsinis, Morphology and mobility diameter of carbonaceous aerosols during agglomeration and surface growth, Carbon, 121, 527-535 (2017).
382. A. Spyrogianni, I.K. Herrmann, K. Keevend, S.E. Pratsinis, K. Wegner, The silanol content and in vitro cytolytic activity of flame-made silica, J. Colloid Interface Sci., 507, 95-106 (2017).
383. C.O. Blattmann, A.T. Güntner, S.E. Pratsinis, In Situ Monitoring of the Deposition of Flame-Made Chemoresistive Gas-Sensing Films, ACS Appl. Mater. Interf., 9, 23926-23933 (2017).
384. K. Fujiwara, K. Okuyama, S.E. Pratsinis, Metal-Support Interactions in Catalysts for Environmental Remediation, Env. Sci. Nano, 4: 2076-2092 (2017).
385. A.T. Güntner, N.A. Sievi, S.J. Theodore, T. Gulich, M. Kohler, S.E. Pratsinis, Noninvasive Body Fat Burn Monitoring from Exhaled Acetone with Si-doped WO3-sensing Nanoparticles, Anal. Chem., 89, 10578–10584 (2017).
386. F. Starsich, P. Gschwend, A. Sergeyev, R. Grange, S.E. Pratsinis, Deep tissue imaging with highly fluorescent NIR nanocrystals after systematic host screening, Chem. Mater. 29, 8158-8166 (2017).
387. E. Goudeli, S.E. Pratsinis, Surface Composition and Crystallinity of Coalescing Silver–Gold Nanoparticles, ACS Nano, 11, 11653-11660 (2017).
388. O.Waser, O.Brenner, A.J. Gröhn, S.E. Pratsinis Process Design for Size-Controlled Flame Spray Synthesis of Li4Ti5O12 and Eletrochemical Performance, Chemical and Process Engineering, 38, 53-68 (2017).
389. B. Pongthawornsakun, O. Mekasuwandumrong, F.J.C.S Aires, R. Büchel, A. Baiker, S.E. Pratsinis, J. Panpranot, Variability of particle configurations achievable by 2-nozzle flame syntheses of the Au-Pd-TiO2 system and their catalytic behaviors in the selective hydrogenation of acetylene, Applied Catal. A: General, 549, 1-7 (2018).
390. A.T. Güntner, S. Abegg, K. Wegner, S.E. Pratsinis, Zeolite membranes for highly selective formaldehyde sensors, Sensors and Actuators B: Chemical, 257, 916-923 (2018).
391. K. Fujiwara and S. E. Pratsinis, Single Pd atoms on TiO2 dominate photocatalytic NOx removal, Applied Catalysis B: Environ., 226, 127-134 (2018).
392. R. Koirala, O.V. Safonova, S.E. Pratsinis, A. Baiker, Effect of Cobalt Loading on Structure and Catalytic Behavior of CoOx/SiO2 in CO2-Assisted Oxidative Dehydrogenation of Ethane Applied Catal. A: General, 552, 77–85 (2018).
393. A. Spyrogianni, K.S. Karadima, E. Goudeli, V.G. Mavrantzas, S.E. Pratsinis Mobility and settling rate of agglomerates of polydisperse nanoparticles, J. Phys. Chem. C, 148, 064703 (2018).
394. J. van den Broek, A.T. Güntner, S.E. Pratsinis, Highly Selective and Rapid Breath Isoprene Sensing Enabled by Activated Alumina Filter, ACS Sensors, 3, 677-683 (2018).
395. K. Keevend, G. Panzarasa, F.H.K. Starsich, M. Zeltner, A. Spyrogianni, E. Tsolaki, G. Fortunato, S.E. Pratsinis, S. Bertazzo, I.K. Herrman, Facile meltPEGylation of flame-made luminescent Tb3+-doped yttrium oxide particles: hemocompatibility, cellular uptake and comparison to silica, Chem. Comm., 54, 2914-2917 (2018).
396. N. Lempesis, N. Smatsi, V.G. Mavrantzas, S.E. Pratsinis, Pressure- and Temperature-induced Monoclinic to Orthorhombic Phase Transition in Silicalite-1, J. Phys. Chem. C, 122, 6217-6229 (2018).
397. M.R. Kholghy, G.A. Kelesidis, S.E. Pratsinis, Reactive polycyclic aromatic hydrocarbon dimerization drives soot nucleation. Phys. Chem. Chem. Phys. 20, 10926-10938 (2018) and Erratum, ibid 20, 28941-28942 (2018).
398. A.T. Güntner, N.J. Pineau, P. Mochalski, H. Wiesenhofer, A. Agapiou, C.A. Mayhew, S.E. Pratsinis, Sniffing Entrapped Humans with Sensor Arrays, Anal. Chem., 90, 4940-4945 (2018) and ACS press release April 18, 2018.
399. C.O. Blattmann, S.E. Pratsinis, Single-step fabrication of polymer nanocomposite films, Materials, 11, 1177 (2018).
400. G.A. Kelesidis, S.E. Pratsinis, Impact of Humidity on Silica Nanoparticle Agglomerate Morphology and Size Distribution, Langmuir, 34, 8532–8541 (2018).
401. F.H.L. Starsich, Ch. Eberhardt, K. Keevend, A. Boss, A.M. Hirt, I.K. Herrmann, S.E. Pratsinis Reduced magnetic coupling in ultra-small iron oxide T1 MRI contrast agents, ACS Applied Bio Mater., 1, 783-791 (2018).
402. A.T. Güntner, J.F. Kompalla, H. Landis, J.S. Theodore, B. Geidl, N.A. Sievi, M.Kohler, S.E. Pratsinis, P.A. Gerber, Guiding Ketogenic Diet with Breath Acetone Sensors, Sensors, 18, 3655 (2018).
403. N.J. Pineau, J.F. Kompalla, A.T. Güntner, S.E. Pratsinis, Orthogonal gas sensor arrays by chemoresistive material design, Microchim. Acta, 185, 563 (2018).
404. F.H.L. Starsich, Ch. Eberhardt, A. Boss A.M. Hirt, S.E. Pratsinis, Coercivity determines magnetic particle heating. Adv. Healthcare Mater., 7, 1800287 (2018).
405. G.A. Kelesidis, S.E. Pratsinis, Soot refractive index and light absorption during agglomeration and surface growth, Proc. Comb. Instit., 37, 1177-1184 (2019).
406. F.H.L. Starsich, I.K. Herrmann, S.E. Pratsinis, Nanopartices for Biomedicine: Coagulation during Synthesis and Applications, Annual Rev. Chem. Biomol. Eng., 10, 155-174 (2019).
407. C.O. Blattmann, S.E. Pratsinis, Nanoparticle filler content and shape in polymer nanocomposites. KONA Powder Part. J. 36, 3-32 (2019) & cover of that journal issue.
408. A.T. Güntner, S. Abegg, K. Königstein, P.A. Gerber, A. Schmidt-Trucksäss, S.E. Pratsinis, Breath Sensors for Health Monitoring, ACS Sensors, 4, 268-280 (2019).
409. M.T. Matter, L. Furer, F.H.K. Starsich, G. Fortunato, S.E. Pratsinis, I.K. Herrman, Engineering the Bioactivity of Flame-made Ceria and Ceria/Bioglass Hybrid Nanoparticles, ACS Appl. Mater. Interf., 11, 2830–2839 (2019).
410. P.M. Gschwend, F.H.L. Starsich, R. Keitel, S.E. Pratsinis, Nd3+-doped BiVO4 luminescent nanothermometers of high sensitivity, Chem. Com., 55, 7147-7150 (2019).
411. G.A. Kelesidis, S.E. Pratsinis, Internal and surface oxidation of soot agglomerates, Combustion and Flame, 209, 493-499 (2019).
412. P.M. Gschwend, S. Conti, A. Kaech, C. Maake, S.E. Pratsinis, Silica-coated TiN particles for killing cancer cells, ACS Appl. Mater. Interf., 11, 2830–2839 (2019).
413. V.G. Mavrantzas, S.E. Pratsinis, The impact of molecular simulations in gas-phase manufacture of nanomaterials, Curr. Opinion Chem. Eng., 23, 174–183 (2019).
414. J. van den Broek, S. Abegg, S.E. Pratsinis, A.T. Güntner, Highly Selective Detection of Methanol over Ethanol by a Handheld Gas Sensor, Nature Comm. 10, 4220 (2019).
415. P.M. Gschwend, F. Krumeich S.E. Pratsinis, 110th Anniversary: Synthesis of Plasmonic Silica-Coated TiN Particles, Ind. Eng. Chem. Res., 58, 16610-16619 (2019).
416. G.A. Kelesidis, M.R. Kholghy, J. Robertz, J. Zuercher, M. Allemann, A. Duric, S.E. Pratsinis, Light scattering from nanoparticle agglomerates, Powder Technology, 365, 52–59 (2020).
417. N.J. Pineau, S.D. Keller, A.T. Güntner, S.E. Pratsinis, Palladium embedded in SnO2 enhances the sensitivity of flame-made chemoresistive gas sensors, Microchim. Acta, 187, 96 (2020).
418. A.T. Güntner, M. Wied, N. Pineau, S.E. Pratsinis, Rapid and selective NH3 sensing by porous CuBr, Adv. Sci., 7, 1903390 (2020).
419. S. Abegg, L. Magro, J. van den Broek, S.E. Pratsinis, A.T. Güntner, A pocket-sized device enables detection of methanol adulteration in alcoholic beverages, Nature Food, 1, 351–354 (2020).
420. P.M. Gschwend, D. Niedbalka, L.R.H. Gerken, I.K. Herrmann, S.E. Pratsinis, Simultaneous Nanothermometry and Deep-tissue Imaging, Adv. Sci., 7, 2000370 (2020).
421. A.T. Güntner, I.C. Weber, S.E. Pratsinis, Catalytic filter for continuous and selective ethanol removal prior to gas sensing, ACS Sens., 5, 1058−1067 (2020).
422. M. Holub, M. Adobes-Vidal, A. Frutiger, P.M. Gschwend, S.E. Pratsinis, D. Momotenko, Single Nanoparticle Thermometry with a Nanopipette, ACS Nano, 14, 7358-7369 (2020).
423. S. Abegg, D. Klein Cerrejon, A.T. Güntner, S.E. Pratsinis, Thickness optimization of porous flame-aerosol deposited WO3 films for NO2 sensing at ppb, Nanomaterials, 10, 1170 (2020).
424. J. van den Broek, D. Klein Cerrejon, S.E. Pratsinis, A.T. Güntner, Selective Formaldehyde Detection at ppb in Indoor Air with a Portable Sensor, J. Hazardous Mater., 399, 123052 (2020).
425. L.Q. Kang, B. Wang, Q. Bing, M.Zalibera, R. Büchel, R. Xu, Q. Wang, Y. Liu, D. Gianolio, C.C. Tang, E. Gibson, M. Danaie, C. Allen, K.Wu, S. Marlow, L.-D. Sun, Q. He, S. Guan, A. Savitsky, J.J. Velasco-Vélez, J. Callison, C.W.M. Kay, S.E. Pratsinis, W. Lubitz, J. Liu, F.R. Wang, Adsorption and activation of molecular oxygen over atomic copper(I/II) site on ceria, Nature Comm. 11, 408 (2020).
426. I.C. Weber, H.P. Braun, F. Krumeich, A.T. Güntner, S.E. Pratsinis, Superior Acetone Selectivity in Gas Mixtures by Catalyst-filtered Chemoresistive Sensors, Adv. Sci., 7, 2001503 (2020).
427. G.A. Kelesidis, A. Bruun, S.E. Pratsinis, The impact of organic carbon on soot light absorption,
     Carbon, 172, 742-749 (2021).
428. N.J. Pineau, F. Krumeich, A.T. Güntner, S.E. Pratsinis Y-doped ZnO films for acetic acid sensing down to ppb at high humidity, Sens. Act. B: Chem., 327, 128843 (2021).
429. J. van den Broek, I.C. Weber, A.T. Güntner, S.E. Pratsinis, Highly selective gas sensing enabled by filters, Materials Horizons 8, 661-684 (2021). DOI: 10.1039/D0MH01453B
430. P.M. Gschwend, J. Hintze, S.E. Pratsinis, I.K. Herrmann, F.H.L. Starsich. Precision in thermal therapy: clinical requirements and solutions from nanotechnology, Adv. Therapeut., 2000193 (2021).
431. G.A. Kelesidis, S.E. Pratsinis, Determination of the volume fraction of soot accounting for its composition and morphology, Proc. Comb. Instit. 38, 1189-1196 (2021).
432. J. van den Broek, D. Bischof, N. Derron, S. Abegg, P.A. Gerber, A.T. Güntner, S.E. Pratsinis, Screening methanol poisoning w/ a portable breath detector, Anal. Chem. 93, 1170-8 (2021).
433. A.T. Güntner, L. Magro, J. van den Broek, S.E. Pratsinis, Detecting methanol in hand sanitizers, iScience, 102050 (2021).
434. I.C. Weber, N. Derron, K. Königstein, P.A. Gerber, A.T. Güntner, S.E. Pratsinis, Monitoring Lipolysis by Sensing Breath Acetone down to ppb, Small Sci. 1, 2100004 (2021). 10.1002/smsc.202100004
435. P.M. Gschwend, K. Keevend, M. Aellen, I.K. Herrmann, S.E. Pratsinis, Bi2O3 boosts brightness, Biocompatibility and Stability of Mn5+-doped Ba3(VO4)2 as NIR-II Contrast Agent, Journal of Materials Chemistry B, 9, 3038 – 3046 (2021). 10.1039/d0tb02792h
436. L.H.R. Gerken, A.L. Neuer, P.M. Gschwend, K. Keevend, A. Gogos, A.H.C. Anthis, S.E. Pratsinis, L. Plasswilm, I.K. Herrmann, Ultra-small Group IV Metal Oxide Radio-enhancers: Scalable Synthesis, Cellular Uptake and Radio-enhancement Efficacies compared to Gold, Chem. Mater. 33, 3098–3112 (2021). doi.org/10.1021/acs.chemmater.0c04565
437. G.A. Kelesidis, S.E. Pratsinis, A perspective on gas-phase synthesis of nanomaterials: process design, impact and outlook, Chem. Eng. J., 421, 129884 (2021). 10.1016/j.cej.2021.129884
438. L.Q. Kang, B.L. Wang, A.T. Güntner, S.Y. Xu, X.H. Wan, Y.Y. Liu, S. Marlow, Y.F. Ren, D. Gianolio, C.C. Tang, V. Murzin, H. Asakura, Q. He, S.L. Guan, J.J.Velasco-Vélez, S.E. Pratsinis, Y.Z. Guo, F.R. Wang, The Electrophilicity of Surface Carbon Species in the Redox Reactions of CuO-CeO2 Catalysts, Angewandte Chemie Intnl Edition, 60, 14420-14428 (2021) 10.1002/anie.202102570
439. N.J. Pineau, L. Magro, J. van den Broek, P. Anderhub, A.T. Güntner, S.E. Pratsinis, Spirit distillation: monitoring methanol formation with a hand-held device, ACS Food Science & Technology, 1, 839–844, (2021). DOI: 10.1021/acsfoodscitech.1c00025.
440. P.M. Gschwend, F.M. Schenk, A. Gogos, S.E. Pratsinis. Acetone Sensing and Catalytic Conversion by Pd-loaded SnO2, Materials, 1383995 (2021).
441. I.C. Weber, P. Rüedi, P. Šot, A.T. Güntner, S.E. Pratsinis, Handheld device for selective benzene sensing over toluene and xylene, Adv. Sci. 2103853 (2022).
442. G.A. Kelesidis, S.E. Pratsinis, Santoro flame: the volume fraction of soot accounting for its morphology & composition, Combustion and Flame, 240, 112025 (2022).
443. A.T. Güntner, N.J. Pineau, S.E. Pratsinis, Flame-made chemoresistive gas sensors and devices, Prog. Energy Combust. Sci., 90 100992 (2022).
444. van den Broek J., Mochalski P., Königstein K., Wang C., Unterkofler K., Schmidt-Trucksäss A., Mayhew C.A., Güntner A.T., Pratsinis S.E., “Portable breath isoprene detector validated during exercise and at rest”, Sens. Act. B: Chem., 357, 131444 (2022).
445. G.A. Kelesidis, D. Neubauer, L-S. Fan, U. Lohmann, S.E. Pratsinis, Enhanced light absorption and radiative forcing by black carbon agglomerates, Env. Sci. Tech., 56, 8610-8618 (2022).
446. P. Šot, G. Noh, I.C. Weber, S.E. Pratsinis, C. Coperet, The Influence of ZnO-ZrO2 Interface in Hydrogenation of CO2 to CH3OH, Helvetica Chim. Acta, 105, e202200007 (2022).
447. U. Trivanovic, G.A. Kelesidis, S.E. Pratsinis, High-throughput generation of aircraft-like soot,
     Aerosol Sci. Technol., 172, 742-749 (2022).
448. G.A. Kelesidis, D. Gao, F.H.L. Starsich, S.E. Pratsinis, Light Extinction by Agglomerates of Gold Nanoparticles: A Plasmon Ruler for Sub-10 nm Interparticle Distances, Anal. Chem., 94, 5310-5316 (2022). 10.1021/acs.analchem.1c05145
449. A.T. Güntner, S. Shon, I.C. Weber, S.E. Pratsinis, P.A. Gerber, Monitoring rapid metabolic changes in health and type-1 diabetes with breath acetone sensors, Sens. Act. B: Chem., 367, 132182 (2022). doi: 10.1016/j.snb.2022.132182 .
450. G.A. Kelesidis, N. Rossi, S.E. Pratsinis, Porosity and crystallinity dynamics of carbon black during internal and surface oxidation, Carbon, 197, 334-340 (2022).
451. G.A. Kelesidis, P. Crepaldi, M. Allemann, A. Duric, S.E. Pratsinis, The mobility diameter of soot determines its angular light scattering distribution, Comb. Flame, 240, 112476 (2023).
452. U. Trivanovic, M. Pereira Martins, S. Benz, G.A. Kelesidis, S.E. Pratsinis, Dynamics of soot formation by enclosed spray combustion of jet fuel, Fuel, 342, 127864 (2023).
453. G.A. Kelesidis, S. Benz, S.E. Pratsinis, Process design for carbon black size and morphology, Carbon, 213, 118255 (2023). 10.1016/j.carbon.2023.118255
454. I.C. Weber, D. Oosthuisen, Mohammad, R., Mayhew, C., S.E. Pratsinis, A.T. Güntner, Dynamic breath limonene sensing at high selectivity, ACS Sensors, 8, 2618-2626 (2023).
455. G.A. Kelesidis, A. Nagarkar, U. Trivanovic, S.E. Pratsinis, Towards elimination of soot emissions from jet fuel combustion, Env. Sci. Tech., 57, 10276−10283 (2023).
456. D. Tsalikis, V.G. Mavrantzas, S.E. Pratsinis, The impact of inelastic molecular collisions on the mean free path of air, Physics of Fluids, 35, 097131 (2023).
457. U. Trivanovic, S.E. Pratsinis, Opinion: Eliminating aircraft soot emissions, Aerosol Research, 2, 207–223 (2024). https://doi.org/10.5194/ar-2023-15
458. K. Jabłczyńska, A. Gogos, C.M.P. Kubsch, S.E. Pratsinis, Embedding Pd into SnO2 drastically enhances gas sensing, Nanoscale Advances., 6, 1259-1268 (2024). DOI 10.1039/D3NA00558E
459. D. Tsalikis, V.G. Mavrantzas, S.E. Pratsinis, A new equation for the mean free path of air, Aerosol Sci. Technol., 58, 930-941 (2024). doi.org/10.1080/02786826.2024.2333859
460. G.A. Kelesidis, P. Crepaldi, S.E. Pratsinis, Oxidation dynamics of soot or carbon black accounting for its core-shell structure and pore network, Carbon, 219, 118764 (2024).
461. U. Trivanovic, S.E. Pratsinis, Trade-off between soot and NO emissions during enclosed spray combustion of jet fuel Scientific Reports, 14, 22417 (2024). https://doi.org/1510.1038/s41598-024-73484-8
462. K. Karadima, D. Tsalikis, V.G. Mavrantzas, S.E. Pratsinis, Diffusion of fullerene and SiO2 nanoparticles in air by fully atomistic molecular dynamics, Journal of Physical Chemistry A. in review (2025).
463. G.A. Kelesidis, S.E. Pratsinis, Ultra porous carbon blacks for energy storage by high temperature oxidation, Powder Technol., in review (2025).

1. Synthesis and Measurement of Ultrafine Particles, edited by J. Marijnissen and S.E. Pratsinis, Delft University Press, Delft, The Netherlands, 1993.
2. S.E. Pratsinis, T.T. Kodas, “Manufacturing of Materials by Aerosol Processes” in Aerosol Measurement, eds. K. Willeke and P. Baron, Chapter 33, pp.721-746, Van Nostrand, Reinhold, New York, 1993.
3. M.K. Akhtar, S.E. Pratsinis, “Thermal Aerosol Processes” in Carbide, Nitride & Boride Materials Synthesis and Processing, ed. A.W. Weimer, Chap. 12, pp.307-342, Chapman & Hall, London, 1997.
4. S.E. Pratsinis, G. Skillas, T.T. Kodas, “Manufacturing of Materials by Aerosol Processes” in Aerosol Measurement: Principles, Techniques and Applications, 2nd ed., eds. P.Baron and K. Willeke, Chapter 32, pp.929-958, Wiley, New York, 2001.
5. K. Wegner, S.E. Pratsinis, “Aerosol based flame synthesis: A Microreactor for Silica Nanoparticles”,in “Innovative Processing of films and nanocrystalline powders”, ed. K.L. Choy, Ch. 18, 193-218, Imperial College Press, London, 2002.
6. S.E. Pratsinis, “Gas Phase Synthesis of Nanoparticles” in “Frontiers in Particle Science and Technology”, eds. D.T. Goddard, S. Lawson, R.A. Williams, Alphagraphics, Leeds, 2002.
7. K. Wegner, S.E. Pratsinis, “Nanomaterialien” in Winnacker-Küchler “Chemische Technik” 5.Aufl., Bd.2, 823-872, Wiley-VCH, Weinheim, 2004.
8. J.T.N. Knijnenburg, A. Teleki, B. Buesser, S.E. Pratsinis, “Core-Shell Nanostructures: Scalable, One-Step Aerosol Synthesis and in-situ SiO2 coating and Functionalization of TiO2 and Fe2O3 Nanoparticles“ in Nanostructured Materials and Nanotechnology IV eds. S. Mathur, S.S. ray and T. Ohji, pp. 1-12, Wiley, Hoboken, NJ (2010).
9. S.E. Pratsinis, “History of the Manufacture of Fine Particles in High-Temperature Aerosol Reactors” in “Aerosol Science and Technology: History and Reviews”, ed. D.S. Ensor & K.N. Lohr, RTI Press, Ch. 18, pp.475-507, 2011.
10. J. Gac, S.E. Pratsinis, “Aerosol Particle Generation” in Powder Technology Handbook, 4th Ed, ed. K. Higashitani, Taylor & Francis, Ch. 4.1, 2019.
11. K. Fujiwara, S.E. Pratsinis, “Aerosol Particle Generation of Particles by Reactions: Gas-Pfase (Aerosol) Techniques” in Powder Technology Handbook, 4th Ed, ed. K. Higashitani, Taylor & Francis, Ch. 4.2.1, 2019 & cover page of the book.

1. S.E. Pratsinis, G. Wang, M.K. Akhtar, S. Panda, Process for Aluminum Nitride Powder Production, U.S. Patent No.5,525,320, June 1996 (licensed to Dow Chemical U.S.A.).
2. S.E. Pratsinis, S. Vemury, G.P. Fotou, A. Gutsch, Aerosol Synthesis of Ceramic Powders, U.S. Patent No. 5,698,177, December, 1997, (licensed to Hosokawa-Micron U.S.A.).
3. S.E. Pratsinis, S. Vemury, G.P. Fotou, A. Gutsch, Vapor Phase Flame Process for Making Ceramic particles using a Corona Discharge Electric Field, U.S. Patent 5,861,132, January , 1999, (licensed to Hosokawa-Micron U.S.A.).
4. S.E. Pratsinis, S. Vemury, Electrically Assisted Synthesis of Particles and Films with Precisely Controlled Charactersistics, U.S. Patent 6,254,940, July, 2001, (licensed to Hosokawa-Micron U.S.A.).
5. H.K. Kammler and S.E. Pratsinis, Composite carbon black-fumed silica nanostructured particles, EP 1,122,212, August 2001, (licensed to Degussa AG).
6. W.J. Stark, L. Maedler, S.E. Pratsinis, Metal oxides prepared by flame spray pyrolysis, US patent 7,211,236, May 2007 (licensed in part to Nanograde AG).
7. Burtscher, P., Mädler, L., Pratsinis, S.E., Moszner, N., Rheinberger, V. “Dental composites based on radio-opaque spray flame synthesis of mixed oxides”, DE 10 2004 006 564.0, US2008160206-A1, July 3, 2008 (licensed to Ivoclar-Vivadent AG).
8. W.J. Stark, S.E. Pratsinis, “Metal delivery System for Nanoparticle Manufacture”, US2006229197 (A1) October 12, 2006 (licensed in part to Nanograde AG).
9. Stark, W.J., Pratsinis, S.E., Maciejewski, M. Loher, S.F., Baiker, A.“Flame synthesis metal salt nanoparticles, in particular Calcium and Phosphate comprising nanoparticles”, US2007196259 (A1) August 23, 2007 (licensed to Avantama AG).
10. Weimer A.W., Pratsinis, S.E., Angeletakis C., George, S.M. „Dental composite filler particles“, US patent 7,396,862, July 8, 2008 (licensed to ALD Nanosolutions, Inc.).
11. Wegner, K., Ly, H., Weiss, R., Pratsinis, S.E., Steinfeld A. “Process and apparatus for producing concurrently hydrogen or ammonia and oxide nanoparticles“ EP1765726 (A1), March 28, 2007.
12. Mädler, L., Rössler A., Pratsinis, S.E., Gurlo, A., Barsan, N., Weimar, U., “Direct formation of highly porous gas-sensing layers by in-situ deposition of flame-made nanoparticles, EP1820007 (A1), August 22, 2007.
13. Height, M.J., Pratsinis, S.E. “Antimicrobial and Antifungal powders made by flame spray pyrolysis”, EP1846327, 10/12/2008, (licensed in part to Heiq AG).
14. Height, J.M., Teleki, H. A., File M., Pratsinis, S.E. Surface functionalization and coating of flame generated nanoparticles EP1874858 (A1), January 9, 2008 (licensed in part to Heiq AG).
15. U. Salz, J. Zimmermann, V. Rheinberger, S. E. Pratsinis, H. Schulz, B. Schimmöller, Radiopaque dental adhesive for fixing composite materials to enamel or dentine, contains acrylic monomers, acid monomers and mixed oxide nano-particles, preferably based on silicon dioxide and tantalum oxide, DE102006045628 (A1), April 3, 2008 (licensed to Ivoclar-Vivadent AG).
16. H.J. Metz, S.E. Pratsinis, R. Strobel, Translucent pigments containing bismuth oxide and bismuth vanadate, EP1829825 (A1), Sept. 5, 2007 (licensed to Clariant Intl. Ltd)
17. Buchel R, Chiruvolu S, Ernst F O, Jaiswal A, Lee JX, Pratsinis SE, Synthesizing metal/metalloid oxide particles useful in formation of transparent electrodes involves pyrolyzing in flame a precursor composition comprising water soluble metal composition, organic liquid and water, US2010102700-A1, 29 Apr 2010 (licensed to NanoGram Co.).
18. Akhtar, M.K., Pratsinis, S.E., Heine, M.C., Strobel, R., Gas-phase production of coated titania, MX 2010005037, 17 Nov. 2007, licenced to Millennium Inorganic Chemicals Inc.
19. G.A. Sotiriou, Ch. Blattmann, S.E. Pratsinis, Method for generation of nanoparticle composite films, EP11005058.0 & WO 2011/175175, June 21, 2011. Received a TechConnect 2013 Innovation Award, May 13-16, 2013 Washington D.C., USA.
20. G.A. Sotiriou, Y. Deligiannakis, S.E. Pratsinis, Low-Cost Hybrid Nanoantioxidant
    Material with Long-lasting Antiradical Capacity, EP1200781, July 12, 2012
21. K. Fujiwara, Y. Deligiannakis, S.E. Pratsinis, Visible light photoactive nanoparticles
    and methods for the preparation thereof, EP13004278.1, August 30, 2013.
22. A.T. Güntner, S.E. Pratsinis, “Fat burning analyser”, CH 01567/16, November 2016. EP 3326523A1, US 2018/0146888A1. licenced to Alivion AG
23. A.T. Güntner, S. Abegg, J. van deb Broek, S.E. Pratsinis “Device and method for detecting an analyte”, November 2019, DE102019100587.6, PCT/EP2019/086797 licenced to Alivion AG

Short Course

(to various industrial & academic audiences)

Aerosol Processing of Materials